The self-test isn't intended to run with HTTP 1.1 as the "Expected protocol" when running against Tomcat 3.3 directly. Thus your failures in this case are normal. If you test through an external web server that supports HTTP 1.1, you should specify HTTP 1.1 to avoid failures.
Since the tests passing with HTTP 1.0, it would appear that Tomcat 3.3 is operating normally in standalone. Cheers, Larry > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, November 13, 2001 9:24 PM > To: [EMAIL PROTECTED] > Subject: Tomcat 3.3 Selt-test failed when protocol is HTTP 1.1 > > > Hi, > > I run into a problem when I try to varifying the installation > of Tomcat 3.3-3 and Apache 1.3.19 on the Red Hat Linux 7.1 > box. The installation of Apache 1.3.19 before the > installation of Tomcat 3.3-3 worked. I was able to get > statics page from it. Next I install the Tomcat 3.3-3. Here > is a listing of modules I installed: > tomcat 3.3-3, > tomcat-webapps-3.3-3, > tomcat-mod-3.3-1. > > I run the JSP test with HTTP/1.0 and HTTP:/1.1. The one with > HTTP/1.0 is fined, But the test with HTTP protocol set to > HTTP/1.1 failed all tests that required the HTTP 1.1 setting. > Please help me with this problem. I assume that this is > configuration problem. But the way the Expected protocal pull > down ways set to HTTP/1.0 after Submit Query buttom was > pressed. Hence, the following listing ways show the HTTP/1.0 > and the text "Running test-tomcat 8080 192.168.0.126 HTTP/1.1" > indicate the type of protocol was selected. > > *************** PASSING TESTS ******************************* > Tomcat Self-test > This page will show the result of executing the sanity test suite. > Target: file params dispatch get requestMap post > wrong_request restricted jsp unavailable headers > security_chk_url security_chk aaa special tomcat-standalone > tomcat-apache client > Debug: > Port: > Host: > Expected protocol: HTTP/1.0 HTTP/1.1 ( use HTTP/1.1 when > testing with Apache or a 1.1 server connector ) > > init > > Running test-tomcat 8080 192.168.0.126 HTTP/1.0 > -------------------------------------------------------------- > ------------------ > > jsp > > -------------------------------------------------------------- > ------------------ > > Test Revision: 1.47 $ > Executed in 11099 Milliseconds. > > FAILED Tests > PASSED Tests > OK ( ) GET /test/jsp/special-name.foo.jsp HTTP/1.0 > OK ( ) GET /test/jsp/HelloWorld.jsp HTTP/1.0 > OK ( ) GET /test/doesNotExist.jsp HTTP/1.0 > OK ( Getting -- HTTP/1.0 302 Found ) GET /test/jsp HTTP/1.0 > OK ( ) GET /test/.jsp HTTP/1.0 > OK ( ) GET /test/jsp/HelloWorld.jsp?????? HTTP/1.0 > OK ( ) GET /test/jsp/HelloWorld.jsp?a=b&c=d HTTP/1.0 > OK ( ) GET /test/jsp/HelloWorld.jsp?&& HTTP/1.0 > OK ( ) GET /test/jsp/declaration/IntegerOverflow.jsp HTTP/1.0 > OK ( ) GET /test/jsp/error/err.jsp HTTP/1.0 > OK ( ) GET /test/jsp/forward/forward.jsp HTTP/1.0 > OK ( ) GET /test/jsp/jsptoserv/jsptoservlet.jsp HTTP/1.0 > OK ( ) GET /test/jsp/initDestroy.jsp HTTP/1.0 > OK ( ) GET /test/jsp/classTest.jsp HTTP/1.0 > OK ( ) GET /test/jsp/import.jsp HTTP/1.0 > OK ( ) GET /test/jsp/buffer.jsp HTTP/1.0 > OK ( ) GET /test/jsp/buffer1.jsp HTTP/1.0 > OK ( ) GET /test/jsp/buffer2.jsp HTTP/1.0 > OK ( ) GET /test/jsp/buffer3.jsp HTTP/1.0 > OK ( ) GET /test/jsp/buffer4.jsp HTTP/1.0 > OK ( ) GET /test/jsp/comments.jsp HTTP/1.0 > OK ( ) GET /test/jsp/parse.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageInfo.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageLanguage.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageIsThreadSafe.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageSession.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageAutoFlush.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageError.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageExtends.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageIsErrorPage.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageContentType.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageImport2.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageImport.jsp HTTP/1.0 > OK ( ) GET /test/jsp/beanTest1.jsp HTTP/1.0 > OK ( ) GET /test/jsp/beanTest2.jsp HTTP/1.0 > OK ( ) GET /test/jsp/beanScopePage.jsp HTTP/1.0 > OK ( ) GET /test/jsp/beanScopeSession.jsp HTTP/1.0 > OK ( ) GET /test/jsp/implicitOut.jsp HTTP/1.0 > OK ( ) GET /test/jsp/implicitConfig.jsp HTTP/1.0 > OK ( ) GET /test/jsp/implicitException.jsp HTTP/1.0 > OK ( ) GET /test/jsp/implicitPageContext.jsp HTTP/1.0 > OK ( ) GET /test/jsp/implicitContext.jsp HTTP/1.0 > OK ( ) GET /test/jsp/implicitRequest.jsp HTTP/1.0 > OK ( ) GET /test/jsp/implicitResponse.jsp HTTP/1.0 > OK ( ) GET /test/jsp/implicitSession.jsp HTTP/1.0 > OK ( ) GET /test/jsp/implicitPageContext.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageInvalid.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageDouble.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageContent3.jsp HTTP/1.0 > OK ( ) GET /test/jsp/bigDeclaration.jsp HTTP/1.0 > OK ( ) GET /test/jsp/include/include.jsp HTTP/1.0 > OK ( ) GET /test/jsp/chinese.jsp HTTP/1.0 > OK ( ) GET /test/jsp/japanese.jsp HTTP/1.0 > OK ( ) GET /test/jsp/extends1.jsp HTTP/1.0 > OK ( ) GET /test/jsp/extends2.jsp HTTP/1.0 > OK ( ) GET /test/jsp/extends3.jsp HTTP/1.0 > OK ( ) GET /test/jsp/extends4.jsp HTTP/1.0 > > ************************ FAILING TESTS ******************** > Tomcat Self-test > This page will show the result of executing the sanity test suite. > Target: file params dispatch get requestMap post > wrong_request restricted jsp unavailable headers > security_chk_url security_chk aaa special tomcat-standalone > tomcat-apache client > Debug: > Port: > Host: > Expected protocol: HTTP/1.0 HTTP/1.1 ( use HTTP/1.1 when > testing with Apache or a 1.1 server connector ) > > init > > Running test-tomcat 8080 192.168.0.126 HTTP/1.1 > -------------------------------------------------------------- > ------------------ > > jsp > > -------------------------------------------------------------- > ------------------ > > Test Revision: 1.47 $ > Executed in 8047 Milliseconds. > > FAILED Tests > FAIL ( ) GET /test/jsp/declaration/IntegerOverflow.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 500') == true > Request: > GET /test/jsp/declaration/IntegerOverflow.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 500 > Got : HTTP/1.0 500 Internal Server Error > > > FAIL ( ) GET /test/jsp/error/err.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/error/err.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/forward/forward.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/forward/forward.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/jsptoserv/jsptoservlet.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/jsptoserv/jsptoservlet.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/initDestroy.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/initDestroy.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/classTest.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/classTest.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/import.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/import.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/buffer.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/buffer.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/comments.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 500') == true > Request: > GET /test/jsp/comments.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 500 > Got : HTTP/1.0 500 Internal Server Error > > > FAIL ( ) GET /test/jsp/parse.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/parse.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/pageError.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/pageError.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/pageContentType.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/pageContentType.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/pageImport.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/pageImport.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/beanTest1.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/beanTest1.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/beanScopePage.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/beanScopePage.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/beanScopeSession.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/beanScopeSession.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/implicitOut.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/implicitOut.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/implicitConfig.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/implicitConfig.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/implicitException.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/implicitException.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/implicitPageContext.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/implicitPageContext.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/implicitContext.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/implicitContext.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/implicitRequest.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/implicitRequest.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/implicitResponse.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/implicitResponse.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/implicitSession.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/implicitSession.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/implicitPageContext.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/implicitPageContext.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/pageContent3.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/pageContent3.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/bigDeclaration.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/bigDeclaration.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/include/include.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/include/include.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/chinese.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/chinese.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/japanese.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/japanese.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/extends3.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/extends3.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > FAIL ( ) GET /test/jsp/extends4.jsp HTTP/1.0 > TEST: ( returnCode matches 'HTTP/1.1 200') == true > Request: > GET /test/jsp/extends4.jsp HTTP/1.0 > Host: 192.168.0.126 > > > > Comments: > Message: > Expecting : HTTP/1.1 200 > Got : HTTP/1.0 200 OK > > > PASSED Tests > OK ( ) GET /test/jsp/special-name.foo.jsp HTTP/1.0 > OK ( ) GET /test/jsp/HelloWorld.jsp HTTP/1.0 > OK ( ) GET /test/doesNotExist.jsp HTTP/1.0 > OK ( Getting -- HTTP/1.0 302 Found ) GET /test/jsp HTTP/1.0 > OK ( ) GET /test/.jsp HTTP/1.0 > OK ( ) GET /test/jsp/HelloWorld.jsp?????? HTTP/1.0 > OK ( ) GET /test/jsp/HelloWorld.jsp?a=b&c=d HTTP/1.0 > OK ( ) GET /test/jsp/HelloWorld.jsp?&& HTTP/1.0 > OK ( ) GET /test/jsp/buffer1.jsp HTTP/1.0 > OK ( ) GET /test/jsp/buffer2.jsp HTTP/1.0 > OK ( ) GET /test/jsp/buffer3.jsp HTTP/1.0 > OK ( ) GET /test/jsp/buffer4.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageInfo.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageLanguage.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageIsThreadSafe.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageSession.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageAutoFlush.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageExtends.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageIsErrorPage.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageImport2.jsp HTTP/1.0 > OK ( ) GET /test/jsp/beanTest2.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageInvalid.jsp HTTP/1.0 > OK ( ) GET /test/jsp/pageDouble.jsp HTTP/1.0 > OK ( ) GET /test/jsp/extends1.jsp HTTP/1.0 > OK ( ) GET /test/jsp/extends2.jsp HTTP/1.0 > > ********** Here is the Apache httpd.conf *********** > > ## > ## httpd.conf -- Apache HTTP server configuration file > ## > > # > # Based upon the NCSA server configuration files originally > by Rob McCool. > # > # This is the main Apache server configuration file. It contains the > # configuration directives that give the server its instructions. > # See <URL:http://www.apache.org/docs/> for detailed information about > # the directives. > # > # Do NOT simply read the instructions in here without understanding > # what they do. They're here only as hints or reminders. If > you are unsure > # consult the online docs. You have been warned. > # > # After this file is processed, the server will look for and process > # /usr/conf/srm.conf and then /usr/conf/access.conf > # unless you have overridden these with ResourceConfig and/or > # AccessConfig directives here. > # > # The configuration directives are grouped into three basic sections: > # 1. Directives that control the operation of the Apache > server process as a > # whole (the 'global environment'). > # 2. Directives that define the parameters of the 'main' or > 'default' server, > # which responds to requests that aren't handled by a > virtual host. > # These directives also provide default values for the settings > # of all virtual hosts. > # 3. Settings for virtual hosts, which allow Web requests to > be sent to > # different IP addresses or hostnames and have them handled by the > # same Apache server process. > # > # Configuration and logfile names: If the filenames you > specify for many > # of the server's control files begin with "/" (or "drive:/" > for Win32), the > # server will use that explicit path. If the filenames do *not* begin > # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" > # with ServerRoot set to "/usr/local/apache" will be > interpreted by the > # server as "/usr/local/apache/logs/foo.log". > # > > ### Section 1: Global Environment > # > # The directives in this section affect the overall operation > of Apache, > # such as the number of concurrent requests it can handle or where it > # can find its configuration files. > # > > # > # ServerType is either inetd, or standalone. Inetd mode is > only supported on > # Unix platforms. > # > ServerType standalone > > # > # ServerRoot: The top of the directory tree under which the server's > # configuration, error, and log files are kept. > # > # NOTE! If you intend to place this on an NFS (or otherwise network) > # mounted filesystem then please read the LockFile documentation > # (available at > <URL:http://www.apache.org/docs/mod/core.html#lockfile>); > # you will save yourself a lot of trouble. > # > # Do NOT add a slash at the end of the directory path. > # > ServerRoot "/etc/httpd" > > # > # The LockFile directive sets the path to the lockfile used > when Apache > # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or > # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally > be left at > # its default value. The main reason for changing it is if the logs > # directory is NFS mounted, since the lockfile MUST BE STORED > ON A LOCAL > # DISK. The PID of the main server process is automatically > appended to > # the filename. > # > LockFile /var/lock/httpd.lock > > # > # PidFile: The file in which the server should record its process > # identification number when it starts. > # > PidFile /var/run/httpd.pid > > # > # ScoreBoardFile: File used to store internal server process > information. > # Not all architectures require this. But if yours does > (you'll know because > # this file will be created when you run Apache) then you > *must* ensure that > # no two invocations of Apache share the same scoreboard file. > # > ScoreBoardFile /var/run/httpd.scoreboard > > # > # In the standard configuration, the server will process this file, > # srm.conf, and access.conf in that order. The latter two files are > # now distributed empty, as it is recommended that all directives > # be kept in a single file for simplicity. The commented-out values > # below are the built-in defaults. You can have the server ignore > # these files altogether by using "/dev/null" (for Unix) or > # "nul" (for Win32) for the arguments to the directives. > # > #ResourceConfig conf/srm.conf > #AccessConfig conf/access.conf > > # > # Timeout: The number of seconds before receives and sends time out. > # > Timeout 300 > > # > # KeepAlive: Whether or not to allow persistent connections (more than > # one request per connection). Set to "Off" to deactivate. > # > KeepAlive On > > # > # MaxKeepAliveRequests: The maximum number of requests to allow > # during a persistent connection. Set to 0 to allow an > unlimited amount. > # We recommend you leave this number high, for maximum performance. > # > MaxKeepAliveRequests 100 > > # > # KeepAliveTimeout: Number of seconds to wait for the next > request from the > # same client on the same connection. > # > KeepAliveTimeout 15 > > # > # Server-pool size regulation. Rather than making you guess how many > # server processes you need, Apache dynamically adapts to the load it > # sees --- that is, it tries to maintain enough server processes to > # handle the current load, plus a few spare servers to handle > transient > # load spikes (e.g., multiple simultaneous requests from a single > # Netscape browser). > # > # It does this by periodically checking how many servers are waiting > # for a request. If there are fewer than MinSpareServers, it creates > # a new spare. If there are more than MaxSpareServers, some of the > # spares die off. The default values are probably OK for most sites. > # > MinSpareServers 5 > MaxSpareServers 20 > > # > # Number of servers to start initially --- should be a > reasonable ballpark > # figure. > # > StartServers 8 > > # > # Limit on total number of servers running, i.e., limit on the number > # of clients who can simultaneously connect --- if this limit is ever > # reached, clients will be LOCKED OUT, so it should NOT BE > SET TOO LOW. > # It is intended mainly as a brake to keep a runaway server > from taking > # the system with it as it spirals down... > # > MaxClients 150 > > # > # MaxRequestsPerChild: the number of requests each child process is > # allowed to process before the child dies. The child will exit so > # as to avoid problems after prolonged use when Apache (and maybe the > # libraries it uses) leak memory or other resources. On most > systems, this > # isn't really needed, but a few (such as Solaris) do have > notable leaks > # in the libraries. For these platforms, set to something like 10000 > # or so; a setting of 0 means unlimited. > # > # NOTE: This value does not include keepalive requests after > the initial > # request per connection. For example, if a child > process handles > # an initial request and 10 subsequent "keptalive" requests, it > # would only count as 1 request towards this limit. > # > MaxRequestsPerChild 100 > > # > # Listen: Allows you to bind Apache to specific IP addresses and/or > # ports, in addition to the default. See also the <VirtualHost> > # directive. > # > #Listen 3000 > #Listen 12.34.56.78:80 > Listen 80 > > # > # BindAddress: You can support virtual hosts with this > option. This directive > # is used to tell the server which IP address to listen to. > It can either > # contain "*", an IP address, or a fully qualified Internet > domain name. > # See also the <VirtualHost> and Listen directives. > # > #BindAddress * > > # > # Dynamic Shared Object (DSO) Support > # > # To be able to use the functionality of a module which was > built as a DSO you > # have to place corresponding `LoadModule' lines at this > location so the > # directives contained in it are actually available _before_ > they are used. > # Please read the file README.DSO in the Apache 1.3 > distribution for more > # details about the DSO mechanism and run `httpd -l' for the > list of already > # built-in (statically linked and thus always available) > modules in your httpd > # binary. > # > # Note: The order is which modules are loaded is important. > Don't change > # the order below without expert advice. > # > # Example: > # LoadModule foo_module modules/mod_foo.so > > #LoadModule mmap_static_module modules/mod_mmap_static.so > LoadModule vhost_alias_module modules/mod_vhost_alias.so > LoadModule env_module modules/mod_env.so > LoadModule config_log_module modules/mod_log_config.so > LoadModule agent_log_module modules/mod_log_agent.so > LoadModule referer_log_module modules/mod_log_referer.so > #LoadModule mime_magic_module modules/mod_mime_magic.so > LoadModule mime_module modules/mod_mime.so > LoadModule negotiation_module modules/mod_negotiation.so > LoadModule status_module modules/mod_status.so > LoadModule info_module modules/mod_info.so > LoadModule includes_module modules/mod_include.so > LoadModule autoindex_module modules/mod_autoindex.so > LoadModule dir_module modules/mod_dir.so > LoadModule cgi_module modules/mod_cgi.so > LoadModule asis_module modules/mod_asis.so > LoadModule imap_module modules/mod_imap.so > LoadModule action_module modules/mod_actions.so > #LoadModule speling_module modules/mod_speling.so > LoadModule userdir_module modules/mod_userdir.so > LoadModule alias_module modules/mod_alias.so > #The LoadModule directive is included in > /et/tomcat/conf/jk/tomcat.conf file > #LoadModule jk_module modules/mod_jk.so > LoadModule rewrite_module modules/mod_rewrite.so > LoadModule access_module modules/mod_access.so > LoadModule auth_module modules/mod_auth.so > LoadModule anon_auth_module modules/mod_auth_anon.so > LoadModule db_auth_module modules/mod_auth_db.so > #LoadModule digest_module modules/mod_digest.so > #LoadModule proxy_module modules/libproxy.so > #LoadModule cern_meta_module modules/mod_cern_meta.so > LoadModule expires_module modules/mod_expires.so > LoadModule headers_module modules/mod_headers.so > #LoadModule usertrack_module modules/mod_usertrack.so > #LoadModule example_module modules/mod_example.so > #LoadModule unique_id_module modules/mod_unique_id.so > LoadModule setenvif_module modules/mod_setenvif.so > #LoadModule bandwidth_module modules/mod_bandwidth.so > #LoadModule put_module modules/mod_put.so > <IfDefine HAVE_PERL> > LoadModule perl_module modules/libperl.so > </IfDefine> > <IfDefine HAVE_PHP> > LoadModule php_module modules/mod_php.so > </IfDefine> > <IfDefine HAVE_PHP3> > LoadModule php3_module modules/libphp3.so > </IfDefine> > <IfDefine HAVE_PHP4> > LoadModule php4_module modules/libphp4.so > </IfDefine> > <IfDefine HAVE_DAV> > LoadModule dav_module modules/libdav.so > </IfDefine> > <IfDefine HAVE_ROAMING> > LoadModule roaming_module modules/mod_roaming.so > </IfDefine> > <IfDefine HAVE_SSL> > LoadModule ssl_module modules/libssl.so > </IfDefine> > > # Reconstruction of the complete module list from all > available modules > # (static and shared ones) to achieve correct module execution order. > # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO] > ClearModuleList > #AddModule mod_mmap_static.c > AddModule mod_vhost_alias.c > AddModule mod_env.c > AddModule mod_log_config.c > AddModule mod_log_agent.c > AddModule mod_log_referer.c > #AddModule mod_mime_magic.c > AddModule mod_mime.c > AddModule mod_negotiation.c > AddModule mod_status.c > AddModule mod_info.c > AddModule mod_include.c > AddModule mod_autoindex.c > AddModule mod_dir.c > AddModule mod_cgi.c > AddModule mod_asis.c > AddModule mod_imap.c > AddModule mod_actions.c > #AddModule mod_speling.c > AddModule mod_userdir.c > AddModule mod_alias.c > #The AddModule directive is included in > /et/tomcat/conf/jk/tomcat.conf file > #AddModule mod_jk.c > AddModule mod_rewrite.c > AddModule mod_access.c > AddModule mod_auth.c > AddModule mod_auth_anon.c > AddModule mod_auth_db.c > #AddModule mod_digest.c > #AddModule mod_proxy.c > #AddModule mod_cern_meta.c > AddModule mod_expires.c > AddModule mod_headers.c > #AddModule mod_usertrack.c > #AddModule mod_example.c > #AddModule mod_unique_id.c > AddModule mod_so.c > AddModule mod_setenvif.c > #AddModule mod_bandwidth.c > #AddModule mod_put.c > <IfDefine HAVE_PERL> > AddModule mod_perl.c > </IfDefine> > <IfDefine HAVE_PHP> > AddModule mod_php.c > </IfDefine> > <IfDefine HAVE_PHP3> > AddModule mod_php3.c > </IfDefine> > <IfDefine HAVE_PHP4> > AddModule mod_php4.c > </IfDefine> > <IfDefine HAVE_DAV> > AddModule mod_dav.c > </IfDefine> > <IfDefine HAVE_ROAMING> > AddModule mod_roaming.c > </IfDefine> > <IfDefine HAVE_SSL> > AddModule mod_ssl.c > </IfDefine> > > # > # ExtendedStatus: controls whether Apache will generate "full" status > # information (ExtendedStatus On) or just basic information > (ExtendedStatus > # Off) when the "server-status" handler is called. The default is Off. > # > #ExtendedStatus On > > ### Section 2: 'Main' server configuration > # > # The directives in this section set up the values used by the 'main' > # server, which responds to any requests that aren't handled by a > # <VirtualHost> definition. These values also provide defaults for > # any <VirtualHost> containers you may define later in the file. > # > # All of these directives may appear inside <VirtualHost> containers, > # in which case these default settings will be overridden for the > # virtual host being defined. > # > > # > # If your ServerType directive (set earlier in the 'Global > Environment' > # section) is set to "inetd", the next few directives don't have any > # effect since their settings are defined by the inetd configuration. > # Skip ahead to the ServerAdmin directive. > # > > # > # Port: The port to which the standalone server listens. For > # ports < 1023, you will need httpd to be run as root initially. > # > Port 80 > > # > # If you wish httpd to run as a different user or group, you must run > # httpd as root initially and it will switch. > # > # User/Group: The name (or #number) of the user/group to run httpd as. > # . On SCO (ODT 3) use "User nouser" and "Group nogroup". > # . On HPUX you may not be able to use shared memory as > nobody, and the > # suggested workaround is to create a user www and use that user. > # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) > # when the value of (unsigned)Group is above 60000; > # don't use Group nobody on these systems! > # > User apache > Group apache > > # > # ServerAdmin: Your address, where problems with the server should be > # e-mailed. This address appears on some server-generated pages, such > # as error documents. > # > ServerAdmin root@localhost > > # > # ServerName: allows you to set a host name which is sent > back to clients for > # your server if it's different than the one the program > would get (i.e., use > # "www" instead of the host's real name). > # > # Note: You cannot just invent host names and hope they work. > The name you > # define here must be a valid DNS name for your host. If you > don't understand > # this, ask your network administrator. > # If your host doesn't have a registered DNS name, enter its > IP address here. > # You will have to access it by its address (e.g., > http://123.45.67.89/) > # anyway, and this will make redirections work in a sensible way. > # > #ServerName localhost > ServerName database > > # > # DocumentRoot: The directory out of which you will serve your > # documents. By default, all requests are taken from this > directory, but > # symbolic links and aliases may be used to point to other locations. > # > # DocumentRoot "/var/www/html" > DocumentRoot "/var/www/voicexml" > > # > # Each directory to which Apache has access, can be > configured with respect > # to which services and features are allowed and/or disabled in that > # directory (and its subdirectories). > # > # First, we configure the "default" to be a very restrictive set of > # permissions. > # > <Directory /> > Options FollowSymLinks > AllowOverride None > </Directory> > > # > # Note that from this point forward you must specifically allow > # particular features to be enabled - so if something's not working as > # you might expect, make sure that you have specifically enabled it > # below. > # > > # > # This should be changed to whatever you set DocumentRoot to. > # > <Directory "/var/www"> > > # > # This may also be "None", "All", or any combination of "Indexes", > # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". > # > # Note that "MultiViews" must be named *explicitly* --- "Options All" > # doesn't give it to you. > # > Options Indexes Includes > > # > # This controls which options the .htaccess files in directories can > # override. Can also be "All", or any combination of > "Options", "FileInfo", > # "AuthConfig", and "Limit" > # > AllowOverride None > > # > # Controls who can get stuff from this server. > # > Order allow,deny > Allow from all > </Directory> > > # > # UserDir: The name of the directory which is appended onto a > user's home > # directory if a ~user request is received. > # > UserDir public_html > > # > # Control access to UserDir directories. The following is an example > # for a site where these directories are restricted to read-only. > # > #<Directory /home/*/public_html> > # AllowOverride FileInfo AuthConfig Limit > # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec > # <Limit GET POST OPTIONS PROPFIND> > # Order allow,deny > # Allow from all > # </Limit> > # <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK> > # Order deny,allow > # Deny from all > # </Limit> > #</Directory> > > # > # DirectoryIndex: Name of the file or files to use as a > pre-written HTML > # directory index. Separate multiple entries with spaces. > # > DirectoryIndex index.html index.htm index.shtml index.php > index.php4 index.php3 index.cgi > > # > # AccessFileName: The name of the file to look for in each directory > # for access control information. > # > AccessFileName .htaccess > > # > # The following lines prevent .htaccess files from being viewed by > # Web clients. Since .htaccess files often contain authorization > # information, access is disallowed for security reasons. Comment > # these lines out if you want Web visitors to see the contents of > # .htaccess files. If you change the AccessFileName directive above, > # be sure to make the corresponding changes here. > # > # Also, folks tend to use names such as .htpasswd for password > # files, so this will protect those as well. > # > <Files ~ "^\.ht"> > Order allow,deny > Deny from all > </Files> > > # > # CacheNegotiatedDocs: By default, Apache sends "Pragma: > no-cache" with each > # document that was negotiated on the basis of content. This > asks proxy > # servers not to cache the document. Uncommenting the > following line disables > # this behavior, and proxies will be allowed to cache the documents. > # > #CacheNegotiatedDocs > > # > # UseCanonicalName: (new for 1.3) With this setting turned > on, whenever > # Apache needs to construct a self-referencing URL (a URL > that refers back > # to the server the response is coming from) it will use > ServerName and > # Port to form a "canonical" name. With this setting off, Apache will > # use the hostname:port that the client supplied, when possible. This > # also affects SERVER_NAME and SERVER_PORT in CGI scripts. > # > UseCanonicalName On > > # > # TypesConfig describes where the mime.types file (or equivalent) is > # to be found. > # > TypesConfig /etc/mime.types > > # > # DefaultType is the default MIME type the server will use > for a document > # if it cannot otherwise determine one, such as from filename > extensions. > # If your server contains mostly text or HTML documents, > "text/plain" is > # a good value. If most of your content is binary, such as > applications > # or images, you may want to use "application/octet-stream" instead to > # keep browsers from trying to display binary files as though they are > # text. > # > DefaultType text/plain > > # > # The mod_mime_magic module allows the server to use various > hints from the > # contents of the file itself to determine its type. The > MIMEMagicFile > # directive tells the module where the hint definitions are located. > # mod_mime_magic is not part of the default server (you have to add > # it yourself with a LoadModule [see the DSO paragraph in the 'Global > # Environment' section], or recompile the server and include > mod_mime_magic > # as part of the configuration), so it's enclosed in an > <IfModule> container. > # This means that the MIMEMagicFile directive will only be > processed if the > # module is part of the server. > # > <IfModule mod_mime_magic.c> > MIMEMagicFile /usr/share/magic > </IfModule> > > # > # HostnameLookups: Log the names of clients or just their IP addresses > # e.g., www.apache.org (on) or 204.62.129.132 (off). > # The default is off because it'd be overall better for the > net if people > # had to knowingly turn this feature on, since enabling it means that > # each client request will result in AT LEAST one lookup > request to the > # nameserver. > # > HostnameLookups Off > > # > # ErrorLog: The location of the error log file. > # If you do not specify an ErrorLog directive within a <VirtualHost> > # container, error messages relating to that virtual host will be > # logged here. If you *do* define an error logfile for a > <VirtualHost> > # container, that host's errors will be logged there and not here. > # > ErrorLog /var/log/httpd/error_log > > # > # LogLevel: Control the number of messages logged to the error_log. > # Possible values include: debug, info, notice, warn, error, crit, > # alert, emerg. > # > LogLevel warn > > # > # The following directives define some format nicknames for use with > # a CustomLog directive (see below). > # > LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" > \"%{User-Agent}i\"" combined > LogFormat "%h %l %u %t \"%r\" %>s %b" common > LogFormat "%{Referer}i -> %U" referer > LogFormat "%{User-agent}i" agent > > # > # The location and format of the access logfile (Common > Logfile Format). > # If you do not define any access logfiles within a <VirtualHost> > # container, they will be logged here. Contrariwise, if you *do* > # define per-<VirtualHost> access logfiles, transactions will be > # logged therein and *not* in this file. > # > CustomLog /var/log/httpd/access_log common > > # > # If you would like to have agent and referer logfiles, uncomment the > # following directives. > # > #CustomLog /var/log/httpd/referer_log referer > #CustomLog /var/log/httpd/agent_log agent > > # > # If you prefer a single logfile with access, agent, and > referer information > # (Combined Logfile Format) you can use the following directive. > # > #CustomLog /var/log/httpd/access_log combined > > # > # Optionally add a line containing the server version and virtual host > # name to server-generated pages (error documents, FTP > directory listings, > # mod_status and mod_info output etc., but not CGI generated > documents). > # Set to "EMail" to also include a mailto: link to the ServerAdmin. > # Set to one of: On | Off | EMail > # > ServerSignature On > > # > # Aliases: Add here as many aliases as you need (with no > limit). The format is > # Alias fakename realname > # > # Note that if you include a trailing / on fakename then the > server will > # require it to be present in the URL. So "/icons" isn't > aliased in this > # example, only "/icons/".. > # > Alias /icons/ "/var/www/icons/" > Alias /voicexml/ "/var/www/voicexml/" > Alias /wxml/ "/var/www/wml/" > > <Directory "/var/www/icons"> > Options Indexes MultiViews > AllowOverride None > Order allow,deny > Allow from all > </Directory> > # > # The /var/www/voicexml directory contains Voice Markup Language files > # > <Directory "/var/www/voicexml"> > Options Indexes MultiViews > AllowOverride None > Order deny,allow > Deny from all > Allow from 192.168.0.1/24 > </Directory> > # > # The /var/www/wml directory contains Wireliss Markup Language files > # > <Directory "/var/www/wml"> > Options Indexes > AllowOverride None > Order deny,allow > Deny from all > Allow from 192.168.0.1/24 > </Directory> > # > # The /var/www/html directory contains HTML files > # > <Directory "/var/www/html"> > > # > # This may also be "None", "All", or any combination of "Indexes", > # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". > # > # Note that "MultiViews" must be named *explicitly* --- "Options All" > # doesn't give it to you. > # > Options Indexes Includes FollowSymLinks > > # > # This controls which options the .htaccess files in directories can > # override. Can also be "All", or any combination of > "Options", "FileInfo", > # "AuthConfig", and "Limit" > # > AllowOverride None > > # > # Controls who can get stuff from this server. > # > Order allow,deny > Allow from all > </Directory> > # > # ScriptAlias: This controls which directories contain server scripts. > # ScriptAliases are essentially the same as Aliases, except that > # documents in the realname directory are treated as applications and > # run by the server when requested rather than as documents > sent to the client. > # The same rules about trailing "/" apply to ScriptAlias > directives as to > # Alias. > # > ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" > > # > # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased > # CGI directory exists, if you have that configured. > # > <Directory "/var/www/cgi-bin"> > AllowOverride None > Options ExecCGI > Order allow,deny > Allow from all > </Directory> > > # > # Redirect allows you to tell clients about documents which > used to exist in > # your server's namespace, but do not anymore. This allows > you to tell the > # clients where to look for the relocated document. > # Format: Redirect old-URI new-URL > # > > # > # Directives controlling the display of server-generated > directory listings. > # > > # > # FancyIndexing: whether you want fancy directory indexing or standard > # > IndexOptions FancyIndexing > > # > # AddIcon* directives tell the server which icon to show for different > # files or filename extensions. These are only displayed for > # FancyIndexed directories. > # > AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip > > AddIconByType (TXT,/icons/text.gif) text/* > AddIconByType (IMG,/icons/image2.gif) image/* > AddIconByType (SND,/icons/sound2.gif) audio/* > AddIconByType (VID,/icons/movie.gif) video/* > > AddIcon /icons/binary.gif .bin .exe > AddIcon /icons/binhex.gif .hqx > AddIcon /icons/tar.gif .tar > AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv > AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip > AddIcon /icons/a.gif .ps .ai .eps > AddIcon /icons/layout.gif .html .shtml .htm .pdf > AddIcon /icons/text.gif .txt > AddIcon /icons/c.gif .c > AddIcon /icons/p.gif .pl .py > AddIcon /icons/f.gif .for > AddIcon /icons/dvi.gif .dvi > AddIcon /icons/uuencoded.gif .uu > AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl > AddIcon /icons/tex.gif .tex > AddIcon /icons/bomb.gif core > > AddIcon /icons/back.gif .. > AddIcon /icons/hand.right.gif README > AddIcon /icons/folder.gif ^^DIRECTORY^^ > AddIcon /icons/blank.gif ^^BLANKICON^^ > > # > # DefaultIcon: which icon to show for files which do not have an icon > # explicitly set. > # > DefaultIcon /icons/unknown.gif > > # > # AddDescription: allows you to place a short description > after a file in > # server-generated indexes. These are only displayed for FancyIndexed > # directories. > # Format: AddDescription "description" filename > # > #AddDescription "GZIP compressed document" .gz > #AddDescription "tar archive" .tar > #AddDescription "GZIP compressed tar archive" .tgz > > # > # ReadmeName: the name of the README file the server will look for by > # default, and append to directory listings. > # > # HeaderName: the name of a file which should be prepended to > # directory indexes. > # > # The server will first look for name.html and include it if found. > # If name.html doesn't exist, the server will then look for name.txt > # and include it as plaintext if found. > # > ReadmeName README > HeaderName HEADER > > # > # IndexIgnore: a set of filenames which directory indexing > should ignore > # and not include in the listing. Shell-style wildcarding is > permitted. > # > IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t > > # > # AddEncoding: allows you to have certain browsers (Mosaic/X > 2.1+) uncompress > # information on the fly. Note: Not all browsers support this. > # Despite the name similarity, the following Add* directives > have nothing > # to do with the FancyIndexing customization directives above. > # > AddEncoding x-compress Z > AddEncoding x-gzip gz tgz > > # > # AddLanguage: allows you to specify the language of a > document. You can > # then use content negotiation to give a browser a file in a language > # it can understand. Note that the suffix does not have to > be the same > # as the language keyword --- those with documents in Polish (whose > # net-standard language code is pl) may wish to use > "AddLanguage pl .po" > # to avoid the ambiguity with the common suffix for perl scripts. > # > AddLanguage en .en > AddLanguage fr .fr > AddLanguage de .de > AddLanguage da .da > AddLanguage el .el > AddLanguage it .it > > # > # LanguagePriority: allows you to give precedence to some languages > # in case of a tie during content negotiation. > # Just list the languages in decreasing order of preference. > # > LanguagePriority en fr de > > # > # AddType: allows you to tweak mime.types without actually > editing it, or to > # make certain files to be certain types. > # > # The following is for PHP4 (conficts with PHP/FI, below): > <IfModule mod_php4.c> > AddType application/x-httpd-php .php4 .php3 .phtml .php > AddType application/x-httpd-php-source .phps > </IfModule> > > # The following is for PHP3: > <IfModule mod_php3.c> > AddType application/x-httpd-php3 .php3 > AddType application/x-httpd-php3-source .phps > </IfModule> > > # The following is for PHP/FI (PHP2): > <IfModule mod_php.c> > AddType application/x-httpd-php .phtml > </IfModule> > > AddType application/x-tar .tgz > > # > # AddHandler: allows you to map certain file extensions to "handlers", > # actions unrelated to filetype. These can be either built > into the server > # or added with the Action command (see below) > # > # If you want to use server side includes, or CGI outside > # ScriptAliased directories, uncomment the following lines. > # > # To use CGI scripts: > # > #AddHandler cgi-script .cgi > > # > # To use server-parsed HTML files > # > AddType text/html .shtml > AddHandler server-parsed .shtml > > # > # Uncomment the following line to enable Apache's send-asis HTTP file > # feature > # > #AddHandler send-as-is asis > > # > # If you wish to use server-parsed imagemap files, use > # > AddHandler imap-file map > > # > # To enable type maps, you might want to use > # > #AddHandler type-map var > > # > # Action: lets you define media types that will execute a > script whenever > # a matching file is called. This eliminates the need for repeated URL > # pathnames for oft-used CGI file processors. > # Format: Action media/type /cgi-script/location > # Format: Action handler-name /cgi-script/location > # > > # > # MetaDir: specifies the name of the directory in which > Apache can find > # meta information files. These files contain additional HTTP headers > # to include when sending the document > # > #MetaDir .web > > # > # MetaSuffix: specifies the file name suffix for the file > containing the > # meta information. > # > #MetaSuffix .meta > > # > # Customizable error response (Apache style) > # these come in three flavors > # > # 1) plain text > #ErrorDocument 500 "The server made a boo boo. > # n.b. the (") marks it as text, it does not get output > # > # 2) local redirects > #ErrorDocument 404 /missing.html > # to redirect to local URL /missing.html > #ErrorDocument 404 /cgi-bin/missing_handler.pl > # N.B.: You can redirect to a script or a document using > server-side-includes. > # > # 3) external redirects > #ErrorDocument 402 http://some.other_server.com/subscription_info.html > # N.B.: Many of the environment variables associated with > the original > # request will *not* be available to such a script. > > # > # The following directives modify normal HTTP response behavior. > # The first directive disables keepalive for Netscape 2.x and > browsers that > # spoof it. There are known problems with these browser > implementations. > # The second directive is for Microsoft Internet Explorer 4.0b2 > # which has a broken HTTP/1.1 implementation and does not properly > # support keepalive when it is used on 301 or 302 (redirect) > responses. > # > BrowserMatch "Mozilla/2" nokeepalive > BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 > force-response-1.0 > > # > # The following directive disables HTTP/1.1 responses to > browsers which > # are in violation of the HTTP/1.0 spec by not being able to grok a > # basic 1.1 response. > # > BrowserMatch "RealPlayer 4\.0" force-response-1.0 > BrowserMatch "Java/1\.0" force-response-1.0 > BrowserMatch "JDK/1\.0" force-response-1.0 > > > # If the perl module is installed, this will be enabled. > <IfModule mod_perl.c> > Alias /perl/ /var/www/perl/ > <Location /perl> > SetHandler perl-script > PerlHandler Apache::Registry > Options +ExecCGI > </Location> > </IfModule> > > # > # Allow http put (such as Netscape Gold's publish feature) > # Use htpasswd to generate /etc/httpd/conf/passwd. > # You must unremark these two lines at the top of this file as well: > #LoadModule put_module modules/mod_put.so > #AddModule mod_put.c > # > #Alias /upload /tmp > #<Location /upload> > # EnablePut On > # AuthType Basic > # AuthName Temporary > # AuthUserFile /etc/httpd/conf/passwd > # EnableDelete Off > # umask 007 > # <Limit PUT> > # require valid-user > # </Limit> > #</Location> > > # > # Allow server status reports, with the URL of > http://servername/server-status > # Change the ".your_domain.com" to match your domain to enable. > # > #<Location /server-status> > # SetHandler server-status > # Order deny,allow > # Deny from all > # Allow from .your_domain.com > #</Location> > > # > # Allow remote server configuration reports, with the URL of > # http://servername/server-info (requires that mod_info.c be loaded). > # Change the ".your_domain.com" to match your domain to enable. > # > #<Location /server-info> > # SetHandler server-info > # Order deny,allow > # Deny from all > # Allow from .your_domain.com > #</Location> > > # Allow access to local system documentation from localhost > Alias /doc/ /usr/share/doc/ > <Location /doc> > order deny,allow > deny from all > allow from localhost > Options Indexes FollowSymLinks > </Location> > > # > # There have been reports of people trying to abuse an old > bug from pre-1.1 > # days. This bug involved a CGI script distributed as a part > of Apache. > # By uncommenting these lines you can redirect these attacks > to a logging > # script on phf.apache.org. Or, you can record them > yourself, using the script > # support/phf_abuse_log.cgi. > # > #<Location /cgi-bin/phf*> > # Deny from all > # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi > #</Location> > > # > # Proxy Server directives. Uncomment the following lines to > # enable the proxy server: > # > #<IfModule mod_proxy.c> > #ProxyRequests On > # > #<Directory proxy:*> > # Order deny,allow > # Deny from all > # Allow from .your_domain.com > #</Directory> > > # > # Enable/disable the handling of HTTP/1.1 "Via:" headers. > # ("Full" adds the server version; "Block" removes all > outgoing Via: headers) > # Set to one of: Off | On | Full | Block > # > #ProxyVia On > > # > # To enable the cache as well, edit and uncomment the following lines: > # (no cacheing without CacheRoot) > # > #CacheRoot "/var/cache/httpd" > #CacheSize 5 > #CacheGcInterval 4 > #CacheMaxExpire 24 > #CacheLastModifiedFactor 0.1 > #CacheDefaultExpire 1 > #NoCache a_domain.com another_domain.edu joes.garage_sale.com > > #</IfModule> > # End of proxy directives. > > ### Section 3: Virtual Hosts > # > # VirtualHost: If you want to maintain multiple > domains/hostnames on your > # machine you can setup VirtualHost containers for them. > # Please see the documentation at > <URL:http://www.apache.org/docs/vhosts/> > # for further details before you try to setup virtual hosts. > # You may use the command line option '-S' to verify your virtual host > # configuration. > > # > # If you want to use name-based virtual hosts you need to define at > # least one IP address (and port number) for them. > # > #NameVirtualHost 12.34.56.78:80 > #NameVirtualHost 12.34.56.78 > > # > # VirtualHost example: > # Almost any Apache directive may go into a VirtualHost container. > # > #<VirtualHost ip.address.of.host.some_domain.com> > # ServerAdmin [EMAIL PROTECTED] > # DocumentRoot /www/docs/host.some_domain.com > # ServerName host.some_domain.com > # ErrorLog logs/host.some_domain.com-error_log > # CustomLog logs/host.some_domain.com-access_log common > #</VirtualHost> > > #<VirtualHost _default_:*> > #</VirtualHost> > > <IfDefine HAVE_SSL> > ## > ## SSL Virtual Host Context > ## > > # Apache will only listen on port 80 by default. Defining > the virtual server > # (below) won't make it automatically listen on the virtual > server's port. > Listen 443 > > <VirtualHost _default_:443> > > # General setup for the virtual host > DocumentRoot "/var/www/html" > > # SSL Engine Switch: > # Enable/Disable SSL for this virtual host. > SSLEngine on > > # SSL Cipher Suite: > # List the ciphers that the client is permitted to negotiate. > # See the mod_ssl documentation for a complete list. > #SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL > > # Server Certificate: > # Point SSLCertificateFile at a PEM encoded certificate. If > # the certificate is encrypted, then you will be prompted for a > # pass phrase. Note that a kill -HUP will prompt again. A test > # certificate can be generated with `make certificate' under > # built time. Keep in mind that if you've both a RSA and a DSA > # certificate you can configure both in parallel (to also allow > # the use of DSA ciphers, etc.) > SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt > #SSLCertificateFile /etc/httpd/conf/ssl.crt/server-dsa.crt > > # Server Private Key: > # If the key is not combined with the certificate, use this > # directive to point at the key file. Keep in mind that if > # you've both a RSA and a DSA private key you can configure > # both in parallel (to also allow the use of DSA ciphers, etc.) > SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key > #SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server-dsa.key > > # Server Certificate Chain: > # Point SSLCertificateChainFile at a file containing the > # concatenation of PEM encoded CA certificates which form the > # certificate chain for the server certificate. Alternatively > # the referenced file can be the same as SSLCertificateFile > # when the CA certificates are directly appended to the server > # certificate for convinience. > #SSLCertificateChainFile /etc/httpd/conf/ssl.crt/ca.crt > > # Certificate Authority (CA): > # Set the CA certificate verification path where to find CA > # certificates for client authentication or alternatively one > # huge file containing all of them (file must be PEM encoded) > # Note: Inside SSLCACertificatePath you need hash symlinks > # to point to the certificate files. Use the provided > # Makefile to update the hash symlinks after changes. > #SSLCACertificatePath /etc/httpd/conf/ssl.crt > #SSLCACertificateFile /etc/httpd/conf/ssl.crt/ca-bundle.crt > > # Certificate Revocation Lists (CRL): > # Set the CA revocation path where to find CA CRLs for client > # authentication or alternatively one huge file containing all > # of them (file must be PEM encoded) > # Note: Inside SSLCARevocationPath you need hash symlinks > # to point to the certificate files. Use the provided > # Makefile to update the hash symlinks after changes. > #SSLCARevocationPath /etc/httpd/conf/ssl.crl > #SSLCARevocationFile /etc/httpd/conf/ssl.crl/ca-bundle.crl > # Client Authentication (Type): > # Client certificate verification type and depth. Types are > # none, optional, require and optional_no_ca. Depth is a > # number which specifies how deeply to verify the certificate > # issuer chain before deciding the certificate is not valid. > #SSLVerifyClient require > #SSLVerifyDepth 10 > > # Access Control: > # With SSLRequire you can do per-directory access control based > # on arbitrary complex boolean expressions containing server > # variable checks and other lookup directives. The syntax is a > # mixture between C and Perl. See the mod_ssl documentation > # for more details. > #<Location /> > #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \ > # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ > # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ > # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ > # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ > # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ > #</Location> > # SSL Engine Options: > # Set various options for the SSL engine. > # o FakeBasicAuth: > # Translate the client X.509 into a Basic Authorisation. > This means that > # the standard Auth/DBMAuth methods can be used for > access control. The > # user name is the `one line' version of the client's > X.509 certificate. > # Note that no password is obtained from the user. Every > entry in the user > # file needs this password: `xxj31ZMTZzkVA'. > # o ExportCertData: > # This exports two additional environment variables: > SSL_CLIENT_CERT and > # SSL_SERVER_CERT. These contain the PEM-encoded > certificates of the > # server (always existing) and the client (only existing > when client > # authentication is used). This can be used to import the > certificates > # into CGI scripts. > # o StdEnvVars: > # This exports the standard SSL/TLS related `SSL_*' > environment variables. > # Per default this exportation is switched off for > performance reasons, > # because the extraction step is an expensive operation > and is usually > # useless for serving static content. So one usually enables the > # exportation for CGI and SSI requests only. > # o CompatEnvVars: > # This exports obsolete environment variables for > backward compatibility > # to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and > Stronghold 2.x. Use this > # to provide compatibility to existing CGI scripts. > # o StrictRequire: > # This denies access when "SSLRequireSSL" or "SSLRequire" > applied even > # under a "Satisfy any" situation, i.e. when it applies > access is denied > # and no other module can change it. > # o OptRenegotiate: > # This enables optimized SSL connection renegotiation > handling when SSL > # directives are used in per-directory context. > #SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars > +StrictRequire > <Files ~ "\.(cgi|shtml)$"> > SSLOptions +StdEnvVars > </Files> > <Directory "/var/www/cgi-bin"> > SSLOptions +StdEnvVars > </Directory> > > # Notice: Most problems of broken clients are also related > to the HTTP > # keep-alive facility, so you usually additionally want to disable > # keep-alive for those clients, too. Use variable > "nokeepalive" for this. > SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown > > # Per-Server Logging: > # The home of a custom SSL log file. Use this when you want a > # compact non-error SSL logfile on a virtual host basis. > CustomLog /var/log/httpd/ssl_request_log \ > "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" > > </VirtualHost> > > Include /etc/tomcat/conf/jk/mod_jk.conf > > > > ********** Here is the Tomcat 3.3-3 tomcat.conf ******* > # tomcat /etc/rc.d script example configuration file > # Use with version 1.07 of the scripts or later > > # Where your java installation lives > # JAVA_HOME=/usr/java/jdk > #JAVA_HOME="/opt/IBMJava2-13" > JAVA_HOME="/usr/local/jdk1.3.1" > > # You can pass some parameters to java > # here if you wish to > #JAVACMD="$JAVA_HOME/bin/java -Xminf0.1 -Xmaxf0.3" > > # Where your tomcat installation lives > # That change from previous RPM where TOMCAT_HOME > # used to be /var/tomcat. > # Now /var/tomcat will be the base for webapps only > TOMCAT_HOME="/etc/tomcat" > > # Where our webapps/libs are now installed. > TOMCAT_INSTALL="/var/tomcat" > > # What user should run tomcat > TOMCAT_USER="tomcat" > > # You can change your tomcat locale here > LANG=en_US > > #Log file for tomcat > TOMCAT_LOG="/var/log/tomcat/tomcat.log" > > # If you wish to further customize your tomcat environment, > # put your own definitions here > # (i.e. LD_LIBRARY_PATH for some jdbc drivers) > # Just do not forget to export them :) > > > ********* Here is the Tomcat 3.3-3 mod_jk.conf > > LoadModule jk_module modules/mod_jk.so > > <IfModule mod_jk.c> > > JkWorkersFile /etc/tomcat/conf/jk/workers.properties > JkLogFile /etc/tomcat/logs/mod_jk.log > JkLogLevel info > JKLogStampFormat "[%a %b %d %H:%M:%S %Y]" > > > JkMount /*.jsp ajp13 > > JkMount /servlet ajp13 > JkMount /servlet/* ajp13 > > JkMount /admin ajp13 > JkMount /admin/* ajp13 > > JkMount /examples ajp13 > JkMount /examples/* ajp13 > > </IfModule> > > > > ******** Here is the Tomcat server.xml > > > <?xml version="1.0" encoding="ISO-8859-1"?> > <Server> > > <!-- You can add a "home" attribute to represent the "base" for > all relative paths. If none is set, the TOMCAT_HOME property > will be used, and if not set "." will be used. > webapps/, work/ and log/ will be relative to this ( unless > set explicitely to absolute paths ). > --> > <ContextManager workDir="/var/spool/tomcat" > > > <!-- ==================== Global modules > ==================== --> > <LoaderInterceptor11 useApplicationLoader="true" /> > > <TrustedLoader /> > > <LogSetter name="tc_log" timestamps="true" > verbosityLevel="INFORMATION" /> > > <LogEvents enabled="false" /> > > <!-- Backward compat: read the Context declarations > from server.xml--> > <ContextXmlReader config="conf/server.xml" /> > > <!-- Separated Context --> > <ContextXmlReader config="conf/apps.xml" /> > > <AutoDeploy source="/var/tomcat/modules" > target="/var/tomcat/modules" > redeploy="true" /> > > <AutoWebApp dir="/var/tomcat/modules" host="DEFAULT" > trusted="true"/> > > <AutoDeploy source="/var/tomcat/webapps" > target="/var/tomcat/webapps" /> > > <AutoWebApp dir="/var/tomcat/webapps" host="DEFAULT" /> > > <PolicyLoader securityManagerClass="java.lang.SecurityManager" > policyFile="conf/tomcat.policy" /> > > <SimpleMapper1 /> > > <SessionExpirer checkInterval="60" /> > <!-- For development you can use > randomClass="java.util.Random" --> > <SessionIdGenerator randomClass="java.security.SecureRandom" > randomFile="/dev/urandom" /> > > > <!-- ========== context processing modules ========== --> > > <!-- This will be the "default" profile > ( all except the "global" modules can be set per > context ) > --> > <LogSetter name="servlet_log" > timestamps="true" > verbosityLevel = "INFORMATION" > path="/var/log/tomcat/servlet-${yyyyMMdd}.log" > /> > > <LogSetter name="JASPER_LOG" > timestamps="true" > path="/var/log/tomcat/jasper-${yyyyMMdd}.log" > verbosityLevel = "INFORMATION" /> > > <WebXmlReader validate="true" /> > > <ErrorHandler showDebugInfo="true" /> > > <WorkDirSetup cleanWorkDir="false" /> > > <Jdk12Interceptor /> > > <!-- Non-standard invoker, for backward compat. ( > /servlet/* ) --> > <InvokerInterceptor /> > > <!-- you can add javaCompiler="jikes" --> > <JspInterceptor keepGenerated="true" > largeFile="false" > useJspServlet="false" > /> > > <StaticInterceptor listings="true" /> > > <ReloadInterceptor fullReload="true" /> > > <SimpleSessionStore maxActiveSessions="-1" /> > > <AccessInterceptor /> > > <CredentialsInterceptor /> > > <SimpleRealm filename="conf/users/global-users.xml" /> > > <!-- UnComment the following and comment out the > above to get a JDBC realm. > Other options for driverName: > driverName="oracle.jdbc.driver.OracleDriver" > connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL" > connectionName="scott" > connectionPassword="tiger" > > driverName="org.gjt.mm.mysql.Driver" > connectionURL="jdbc:mysql://localhost/authority" > connectionName="test" > connectionPassword="test" > > "connectionName" and "connectionPassword" are optional. > --> > <!-- > <JDBCRealm > debug="99" > driverName="sun.jdbc.odbc.JdbcOdbcDriver" > connectionURL="jdbc:odbc:TOMCAT" > userTable="users" > userNameCol="user_name" > userCredCol="user_pass" > userRoleTable="user_roles" > roleNameCol="role_name" /> > --> > > <LoadOnStartupInterceptor /> > > <Servlet22Interceptor /> > > > <!-- Tag pooling support. > To enable the reuse of tag handlers as described in > the JSP spec, uncomment the following. If your pages > use a lot of custom tags, you should see a nice > performance > gain. > > Note that placing the interceptor here will enable > Tag pooling for all of the web applicatitions loaded - > this may be a bad thing if all tags are not coded to > handle reuse. To enable pooling only for specific web > applications i.e. Contexts, place the > interceptor inside of > the Context's definition. > > To view information about tag usage uncomment the tag > LogSetter. Set verbosityLevel to DEBUG to see everytime > a tag is obtained and released. > --> > <!-- > <LogSetter name="tag_pool_log" timestamps="true" > path="/var/log/tomcat/tagpool-${yyyyMMdd}.log" > verbosityLevel="INFORMATION" /> > > <TagPoolManagerInterceptor /> > --> > > <!-- Request processing --> > > <DecodeInterceptor /> > > <SessionId cookiesFirst="true" noCookies="false" /> > > <!-- Automatic config generation > Set noRoot="false" if you wish to have Tomcat try to take > control of the external web server's root context. > Additonal configuration of the external web > server may be > required for this to be successful. > Note: Configuration files are not written as part of the > default startup behvior. Append "jkconf" to > the startup > command to have Tomcat initialize, write the > config files, > then exit. This may be done while Tomcat is running. > example: #dtomcat start jkconf > --> > <!-- Since noRoot and forwardAll are both set to true > mean all request send to tomcat except the root > context "index.html" > at the root level will be serviced by apache > --> > > <ApacheConfig noRoot="true" forwardAll="true" /> > <IISConfig noRoot="true" /> > <NSConfig noRoot="true" /> > > <!-- Uncoment for apache-style logs > Attributes: logFile, flush, format > <AccessLogInterceptor/> > --> > <!-- ==================== Connectors ==================== --> > > <!-- new http adapter. Attributes: > secure - use SSL ( https ) > keystore, keypass - certs for SSL > port > reportedname - Server name to send back to browser > by default report Tomcat Web Server ... > set an empty string to avoid > sending server header > --> > <Http10Connector port="8080" > secure="false" > maxThreads="100" > maxSpareThreads="50" > minSpareThreads="10" /> > > <!-- > Uncomment this for SSL support. You _need_ to set up a > server certificate if you want this to work, and you > need JSSE. See tomcat-ssl-howto.html for more detailed > instructions. > > 1. Make the JSSE jars available to Tomcat, either > by making > them an installed extension or by adding them to the > Tomcat CLASSPATH. > 2. Do: keytool -genkey -alias tomcat -keyalg RSA > RSA is essential to work with Netscape and IIS. > Use "changeit" as password. ( or add keypass > attribute ) > You don't need to sign the certificate. > --> > <!-- > <Http10Connector port="8443" secure="true" /> > --> > > <!-- > JNI connector. It assumes the library is located in > TOMCAT_HOME/bin/native/jni_connect.[dll, nlm, > so]. or in LD_LIBRARY_PATH. > For different paths set "nativeLibrary" parameter. > > The JniConnector will be self-enable only if JNI > mode is detected. > --> > <JniConnector /> > > <!-- Apache AJP12 support. This is also used to shut > down tomcat. > Parameter "address" defines network interface > this Interceptor > "binds" to. Add it if you want to "bind" to just > "127.0.0.1". > > address="127.0.0.1" > > Parameter "tomcatAuthentication", controls if > Tomcat honors > ( and uses ) auth done in HTTP Server or not, > when true Tomcat does > not use in any way auth information provided by > the HTTP Server. > true is the default. > > tomcatAuthentication="false" > > --> > <Ajp12Connector address="127.0.0.1" port="8007" > AjpidFile="/var/spool/tomcat/ajp12.id" /> > > <!-- Apache AJP13 support (mod_jk) > Parameter "address" defines network interface > this Interceptor > "binds" to. Add it if you want to "bind" to just > "127.0.0.1". > > address="127.0.0.1" > > Parameter "tomcatAuthentication", controls if > Tomcat honors > ( and uses ) auth done in HTTP Server or not, > when true Tomcat does > not use in any way auth information provided by > the HTTP Server. > true is the default. > > tomcatAuthentication="false" > > > --> > <Ajp13Connector port="8009" /> > > <!-- > Context definitions can be placed here ( not > recommended ) or > in separate files. The ContextXmlReader will read > all context > definitions ( you can customize the "base" filename ). > > The default is conf/apps-[name].xml. > > See conf/apps-examples.xml and conf/apps-admin.xml > --> > > </ContextManager> > </Server> > > > > > Kam Lung Leung > > -- > To unsubscribe: <mailto:[EMAIL PROTECTED]> > For additional commands: <mailto:[EMAIL PROTECTED]> > Troubles with the list: <mailto:[EMAIL PROTECTED]> > -- To unsubscribe: <mailto:[EMAIL PROTECTED]> For additional commands: <mailto:[EMAIL PROTECTED]> Troubles with the list: <mailto:[EMAIL PROTECTED]>
