I basically did the install like you did below and everything works fine for me when I just use 'localhost' and try the stuff on the particular machine where everything resides. However no matter what I try I can not get apache2.0.39 to pick up any Tomcat applications when typing in the url from another machine. I'm tyring to set up under a different port 7000... and http://afs.outback.com:7000/ brings up apache fine http://afs.outback.com:8080/myApp/ brings up tomcat fine http://afs.outback.com:7000/myApp/ no good doesn't serve up my tomcat app
However running on the machine where the server is and use localhost above and everything is fine. Very frustrating that I can't find documentation on this. If anyone has ideas let me know. Aleksandr, double check your set up with this doc http://mpcon.org/temp/how2install_apache_w_php_jsp_support.doc It worked fine for mine under localhost but still having problems above. On Wednesday, July 24, 2002, 8:40:32 AM, Aleksandr wrote: AJ> Hi all, AJ> My name is Aleksandr Jones. Greetings to all Apache of the open source AJ> community. AJ> I am attempting to get Apache 2.0.36 and Tomcat 4.0.4 connected, so that AJ> static AJ> content is served by the former and dynamic by the latter. I am running AJ> Windows AJ> 2000 SP2 on an Intel Machine. I mainly used the galatea.com flash guide for AJ> integrating Apache 2.0.36 and Tomcat 4.04 as a guideline for this. AJ> I have done the following steps: AJ> I downloaded the JDK 1.4 installation file --> AJ> j2sdk-1_4_0_01-windows-i586.exe AJ> My JDK 1.4 is installed in C:\j2sdk14 AJ> My environment variables are set as follows: AJ> %JAVA_HOME% = C:\j2sdk14\ %PATH% = %PATH% -->> append C:\j2sdk14\; C:\j2sdk14\bin AJ> That's my Java stuff. AJ> I downloaded and ran the windows installer (MSI) installation for Tomcat AJ> 4.0. I AJ> ran the installation and put tomcat in C:\Tomcat4\ AJ> My environment variables are thusly set: AJ> %Catalina_Home% = C:\Tomcat4\ AJ> %Tomcat_Home% = C:\Tomcat4\ AJ> Tomcat is installed as a service, so I start the sucker up and check it out: AJ> http://localhost:8080/ --> and I immediately see the Tomcat page: AJ> "If you're seeing this page via a web browser, AJ> it means you've setup Tomcat successfully. Congratulations!" AJ> There's my Tomcat stuff for now. AJ> I downloaded the source code for Apache HTTP Server 2.0.36. AJ> My environment variables are thusly set: AJ> %Apache2_Home% = C:\Apache2\ AJ> %Apache_Home% = C:\Apache\ AJ> I built the INSTALLBIN configuration in my *ahem* Microsoft Visual Studio, AJ> and it produced my Apache2 configuration. AJ> I run Apache from the command line, and test http://localhost:80 AJ> For which it responds: AJ> "If you can see this, it means that the installation of the Apache web AJ> server AJ> software on this system was successful...." etc. AJ> Next, I downloaded Apache Ant 1.5, and extract it to C:\JakartaAnt\bin; AJ> My environment variables are thusly set: %PATH% = %PATH% -->> append C:\JakartaAnt\bin; AJ> There goes Ant. AJ> Next I downloaded jakarta-tomcat-connectors-4.0.2.01-src.zip. I extracted AJ> to the directory C:\JKConnectors\ AJ> Here is a dump of the file C:\JKConnectors\jk\build.properties AJ> # AJ> # sample build.properties for ajp connector. AJ> # edit to taste... AJ> # AJ> # $Id: build.properties.sample,v 1.2 2001/05/29 23:05:52 seguin Exp $ AJ> # AJ> tomcat40.home=c:/Tomcat4 AJ> apache2.home=c:/Apache2 AJ> apr.include=${apache2.home}/include AJ> apr.lib=${apache2.home}/lib AJ> so.debug=true AJ> so.optimize=false AJ> so.profile=false AJ> Looks good, I think. AJ> I decided to futz with Build.xml in exactly this one way: AJ> <property name="tomcat40.home" AJ> location="C:/tomcat4" /> AJ> I ran ANT in the directory C:\JKConnectors\jk\. That produces this output: AJ> Buildfile: build.xml AJ> detect: AJ> [echo] -------- jakarta-tomcat-connectors -------- AJ> guess_catalina40: AJ> guess_catalina41: AJ> cpath: AJ> prepare: AJ> report: AJ> [echo] Tomcat33: ${tomcat33.detect} ${tomcat33.home} AJ> [echo] Tomcat40: true c:/Tomcat4 AJ> [echo] Tomcat41: ${tomcat41.detect} ${tomcat41.home} AJ> [echo] Apache13: ${apache13.detect} ${apache13.home} AJ> [echo] Apache2: true c:/Apache2 AJ> [echo] iPlanet: ${iplanet.detect} ${iplanet.home} AJ> [echo] IIS: ${iis.detect} ${iis.home} AJ> [echo] Using catalina.home: C:\Tomcat4 AJ> jkutil: AJ> jkjava: AJ> jkant: AJ> build-main: AJ> BUILD SUCCESSFUL AJ> Total time: 2 seconds AJ> I ran "ANT INSTALL" in the directory C:\JKConnectors\jk\. AJ> That produces this simliar output: AJ> Buildfile: build.xml AJ> detect: AJ> [echo] -------- jakarta-tomcat-connectors -------- AJ> guess_catalina40: AJ> guess_catalina41: AJ> cpath: AJ> prepare: AJ> report: AJ> [echo] Tomcat33: ${tomcat33.detect} ${tomcat33.home} AJ> [echo] Tomcat40: true c:/Tomcat4 AJ> [echo] Tomcat41: ${tomcat41.detect} ${tomcat41.home} AJ> [echo] Apache13: ${apache13.detect} ${apache13.home} AJ> [echo] Apache2: true c:/Apache2 AJ> [echo] iPlanet: ${iplanet.detect} ${iplanet.home} AJ> [echo] IIS: ${iis.detect} ${iis.home} AJ> [echo] Using catalina.home: C:\Tomcat4 AJ> jkutil: AJ> jkjava: AJ> jkant: AJ> build-main: AJ> install-t33: AJ> install-t40: AJ> install-t41: AJ> install-a20: AJ> install-a13: AJ> install: AJ> BUILD SUCCESSFUL AJ> Total time: 2 seconds AJ> Now, after repeatedly failing to use the AJ> mod_jk.dll from http://www.acg-gmbh.de/mod_jk/, I went and compiled AJ> the one in the C:\JKConnectors\JK\Native\Apache-2.0. AJ> (Notice, these failures were marked by error messages and Apache AJ> failing start; I excluded this data since I got past it with my AJ> homegrown version) AJ> So, *poof*, now I have mod_jk.dll. I copy mod_jk.dll into AJ> C:\Apache2\Modules\ directory. AJ> Now, I went to my Tomcat server.xml file and modified it thusly: AJ> 1.) The log file listener: AJ> <Server port="8005" shutdown="SHUTDOWN" debug="0"> AJ> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig" AJ> modJk="c:/Apache2/modules/mod_jk.dll" jkDebug="info" AJ> workersConfig="c:/Tomcat4/conf/jk/workers.properties" AJ> jkLog="c:/Tomcat4/logs/mod_jk.log"/> AJ> 2.) Get the AJP Connector listening on port 8009 AJ> <Service name="Tomcat-Standalone"> AJ> <!-- Define an AJP 1.3 Connector on port 8009 --> AJ> <Connector className="org.apache.ajp.tomcat4.Ajp13Connector" AJ> port="8009" minProcessors="5" maxProcessors="75" AJ> acceptCount="10" debug="0"/> AJ> 3.) Humor a suggestion from Galatea's guide ;-) AJ> <!-- Define the default virtual host --> AJ> <Host name="localhost" debug="0" appBase="webapps" unpackWARs="true"> AJ> <!-- Galatea's recommendation: seems to append additional data to the log file... -->> AJ> <Listener className="org.apache.ajp.tomcat4.config.ApacheConfig" AJ> append="true" /> AJ> Next, I ran Tomcat to auto-generate the mod_jk.conf file. AJ> My mod_jk.conf file is exactly this: AJ> ########## Auto generated on Thu Jul 18 22:10:37 CDT 2002########## AJ> <IfModule !mod_jk.c> AJ> LoadModule jk_module c:/Apache2/modules/mod_jk.dll AJ> </IfModule> AJ> JkWorkersFile "c:/Tomcat4/conf/jk/workers.properties" AJ> JkLogFile "c:/Tomcat4/logs/mod_jk.log" AJ> JkLogLevel info AJ> <VirtualHost localhost> AJ> ServerName localhost AJ> JkMount /manager ajp13 AJ> JkMount /manager/* ajp13 AJ> JkMount /examples ajp13 AJ> JkMount /examples/* ajp13 AJ> JkMount /tomcat-docs ajp13 AJ> JkMount /tomcat-docs/* ajp13 AJ> JkMount /webdav ajp13 AJ> JkMount /webdav/* ajp13 AJ> JkMount /jk ajp13 AJ> JkMount /jk/* ajp13 AJ> </VirtualHost> AJ> C:\Tomcat4\conf\jk\worker.properties --> it's contents: AJ> workers.tomcat_home=C:/Tomcat4 AJ> workers.java_home=C:/J2SDK14 AJ> ps=\ AJ> worker.list=ajp13, ajp14 AJ> worker.ajp13.port=8009 AJ> worker.ajp13.host=localhost AJ> worker.ajp13.type=ajp13 AJ> worker.ajp13.lbfactor=1 AJ> worker.ajp14.port=8010 AJ> worker.ajp14.host=localhost AJ> worker.ajp14.type=ajp14 AJ> worker.ajp14.secretkey=secret AJ> worker.ajp14.credentials=myveryrandomentropy AJ> worker.ajp14.lbfactor=1 AJ> worker.loadbalancer.type=lb AJ> worker.loadbalancer.balanced_workers=ajp13 AJ> worker.inprocess.type=jni AJ> worker.inprocess.class_path=$(workers.tomcat_home)$(ps)lib$(ps)tomcat.jar AJ> worker.inprocess.cmd_line=start AJ> worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)classic$(ps)jvm.dll AJ> worker.inprocess.stdout=$(workers.tomcat_home)$(ps)logs$(ps)inprocess.stdout AJ> worker.inprocess.stderr=$(workers.tomcat_home)$(ps)logs$(ps)inprocess.stderr AJ> Alright, and now finally, my httpd.conf file contains a line: AJ> Include c:/tomcat4/conf/auto/mod_jk.conf AJ> which obviously references my mod_jk.conf file with the Load Module AJ> directive. AJ> With all of this, I get the following page in my browser: AJ> Server error! AJ> Error message: AJ> handler "jakarta-servlet" not found for: examples AJ> If you think this is a server error, please contact the webmaster AJ> And that's it, thus far. Does anyone know what I'm doing wrong? AJ> Any questions, did I leave anything out? AJ> Many many thanks for listening -- and hopefully helping :-D AJ> Aleksandr AJ> _________________________________________________________________ AJ> Join the world’s largest e-mail service with MSN Hotmail. AJ> http://www.hotmail.com AJ> -- AJ> To unsubscribe, e-mail: <mailto:[EMAIL PROTECTED]> AJ> For additional commands, e-mail: <mailto:[EMAIL PROTECTED]> -- Rick mailto:[EMAIL PROTECTED] -- To unsubscribe, e-mail: <mailto:[EMAIL PROTECTED]> For additional commands, e-mail: <mailto:[EMAIL PROTECTED]>
