Actually all three of the files were there, copied them over and I'm going to try them out and see what happens. I'm also downgrading to apache1.3.27, the 2.0.44 build wouldn't start and I don't want to screw with it.
--mikej -=----- mike jackson [EMAIL PROTECTED] > -----Original Message----- > From: Turner, John [mailto:[EMAIL PROTECTED] > Sent: Wednesday, February 26, 2003 11:04 AM > To: 'Tomcat Users List' > Subject: RE: problems compiling and using mod_jk > > > > Sounds good to me, I really have no idea. My experience with > build tools is > pretty minimal. > > John > > > -----Original Message----- > > From: Mike Jackson [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, February 26, 2003 2:02 PM > > To: Tomcat Users List > > Subject: RE: problems compiling and using mod_jk > > > > > > I found an install-sh in > > "/usr/local/share/automake/install-sh", is that > > where it ought to get getting it from? > > > > --mikej > > -=----- > > mike jackson > > [EMAIL PROTECTED] > > > > > -----Original Message----- > > > From: Mike Jackson [mailto:[EMAIL PROTECTED] > > > Sent: Wednesday, February 26, 2003 10:59 AM > > > To: Tomcat Users List > > > Subject: RE: problems compiling and using mod_jk > > > > > > > > > It looks like there's an ac_aux_dir that isn't begin set > > properly, where > > > does that come from and what should it look like? The ac_aux_dir is > > > referenced in aclocal.m4. It says "Actually configure libtool. > > > ac_aux_dir > > > is where install-sh is found." in a comment in the area I > > think that the > > > problem might be at, but I can't seem to figure out what it > > should be and > > > where it ought to be set. > > > > > > --mikej > > > -=----- > > > mike jackson > > > [EMAIL PROTECTED] > > > > > > > -----Original Message----- > > > > From: Mike Jackson [mailto:[EMAIL PROTECTED] > > > > Sent: Wednesday, February 26, 2003 10:46 AM > > > > To: Tomcat Users List > > > > Subject: RE: problems compiling and using mod_jk > > > > > > > > > > > > I'm root, I don't see how there could be a permissions problem. :) > > > > > > > > --mikej > > > > -=----- > > > > mike jackson > > > > [EMAIL PROTECTED] > > > > > > > > > -----Original Message----- > > > > > From: Turner, John [mailto:[EMAIL PROTECTED] > > > > > Sent: Wednesday, February 26, 2003 10:34 AM > > > > > To: 'Tomcat Users List' > > > > > Subject: RE: problems compiling and using mod_jk > > > > > > > > > > > > > > > > > > > > I would say "Yes". ;) > > > > > > > > > > Could it be a permissions problem? There aren't many reasons > > > > for a failed > > > > > copy. > > > > > > > > > > John > > > > > > > > > > > -----Original Message----- > > > > > > From: Mike Jackson [mailto:[EMAIL PROTECTED] > > > > > > Sent: Wednesday, February 26, 2003 1:26 PM > > > > > > To: Tomcat Users List > > > > > > Subject: RE: problems compiling and using mod_jk > > > > > > > > > > > > > > > > > > Ok I've got the latest versions (again), removed any > > > > > > lingering build and > > > > > > installed files, and unpacked the srcs and binaries (tomcat > > > > > > is binary). > > > > > > Apache2 seems to have compiled and installed successfully. I > > > > > > haven't tried > > > > > > to start it yet, but I'll do that after I get the connector > > > > > > built. Anyway, > > > > > > I ran buildconf.sh and got the following: > > > > > > > > > > > > # ./buildconf.sh > > > > > > libtoolize --force --automake --copy > > > > > > aclocal > > > > > > automake -a --foreign -i --copy > > > > > > automake: configure.in: installing > > `scripts/build/unix/install-sh' > > > > > > error while copying > > > > > > > > > > > > automake: configure.in: installing > > > `scripts/build/unix/mkinstalldirs' > > > > > > error while copying > > > > > > > > > > > > automake: configure.in: installing > > `scripts/build/unix/missing' > > > > > > error while copying > > > > > > > > > > > > autoconf > > > > > > > > > > > > Do I already have a problem? > > > > > > > > > > > > --mikej > > > > > > -=----- > > > > > > mike jackson > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > -----Original Message----- > > > > > > > From: Mike Jackson [mailto:[EMAIL PROTECTED] > > > > > > > Sent: Wednesday, February 26, 2003 10:08 AM > > > > > > > To: Tomcat Users List > > > > > > > Subject: RE: problems compiling and using mod_jk > > > > > > > > > > > > > > > > > > > > > Hmm, ok, then: > > > > > > > > > > > > > > # find / -name apxs -print > > > > > > > /home/mjackson/new-apache/httpd-2.0.44/support/apxs > > > > > > > > > > > > > > the build directory for apache2 > > > > > > > > > > > > > > /usr/local/apache/bin/apxs > > > > > > > > > > > > > > the apache 1.3 install > > > > > > > > > > > > > > /usr/local/apache2/bin/apxs > > > > > > > > > > > > > > the apache 2.0.44 install > > > > > > > > > > > > > > I didn't find any others out there. I'll remove and > > > > > > re-setup the apache > > > > > > > install. I run some "production" code on the old version > > > > > > of apache (with > > > > > > > tomcat 3.3.1a), but I can remove it temporarily and > > see if that > > > > > > > helps. I'll > > > > > > > just go some "fresh" archives for the source again. > > > > > > > > > > > > > > --mikej > > > > > > > -=----- > > > > > > > mike jackson > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > From: Jake Robb [mailto:[EMAIL PROTECTED] > > > > > > > > Sent: Wednesday, February 26, 2003 9:59 AM > > > > > > > > To: Tomcat Users List > > > > > > > > Subject: Re: problems compiling and using mod_jk > > > > > > > > > > > > > > > > > > > > > > > > I had a similar problem trying to build mod_jk2, > > where it didn't > > > > > > > > create the > > > > > > > > .so file. > > > > > > > > > > > > > > > > I don't remember it very well, but I believe the problem > > > > > > was that I had > > > > > > > > upgraded Apache, but had missed the copy of apxs > > in /usr/bin. > > > > > > > By removing > > > > > > > > /usr/bin/apxs and /usr/bin/apachectl, plus my > > entire Apache2 > > > > > > > installation, > > > > > > > > and then rebuilding from source, I was able to rebuild > > > > > > apxs, which then > > > > > > > > solved the problem. > > > > > > > > > > > > > > > > John: by the way, the --with-apxs2 argument is > > only for jk2. > > > > > > > > > > > > > > > > Mike: the "no apache given" message is okay. The script > > > > > > looks for both > > > > > > > > apache and apache2 (you could specify both, if > > for whatever > > > > > > > > reason you have > > > > > > > > both installed). It didn't find a 1.3.x version > > of Apache, and > > > > > > > > that's not a > > > > > > > > problem. > > > > > > > > > > > > > > > > -Jake > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > > > From: "Mike Jackson" <[EMAIL PROTECTED]> > > > > > > > > To: "Tomcat Users List" <[EMAIL PROTECTED]> > > > > > > > > Sent: Wednesday, February 26, 2003 12:20 PM > > > > > > > > Subject: RE: problems compiling and using mod_jk > > > > > > > > > > > > > > > > > > > > > > > > > I didn't get the configure AC_PROG_CPP error, > > but here's what > > > > > > > was output > > > > > > > > in > > > > > > > > > apache-2.0 > > > > > > > > > > > > > > > > > > # ls -l > > > > > > > > > total 3462 > > > > > > > > > -rw-r--r-- 1 root sys 2243 Feb 26 > > > > > > 09:19 Makefile > > > > > > > > > -rw-r--r-- 1 root sys 736 > > Feb 26 09:19 > > > > > > > Makefile.apxs > > > > > > > > > -rw-r--r-- 1 root root 661 > > Dec 19 05:52 > > > > > > > > Makefile.apxs.in > > > > > > > > > -rw-r--r-- 1 root root 2131 Dec 19 > > > > > > 05:52 Makefile.in > > > > > > > > > -rw-r--r-- 1 root root 15020 Dec 19 > > > > > > 05:52 bldjk.qclsrc > > > > > > > > > -rw-r--r-- 1 root root 448 Dec 19 > > > > > > 05:52 config.m4 > > > > > > > > > -rw-r--r-- 1 root sys 777044 Feb 26 > > > > > > 09:20 libmod_jk.a > > > > > > > > > lrwxrwxrwx 1 root sys 18 > > Feb 26 09:20 > > > > > > > > libmod_jk.so -> > > > > > > > > > libmod_jk.so.0.0.0 > > > > > > > > > lrwxrwxrwx 1 root sys 18 > > Feb 26 09:20 > > > > > > > > libmod_jk.so.0 -> > > > > > > > > > libmod_jk.so.0.0.0 > > > > > > > > > -rw-r--r-- 1 root sys 689252 > > Feb 26 09:20 > > > > > > > > libmod_jk.so.0.0.0 > > > > > > > > > -rw-r--r-- 1 root root 70552 Dec 19 > > > > > > 05:52 mod_jk.c > > > > > > > > > -rw-r--r-- 1 root root 7129 Dec 19 > > > > > > 05:52 mod_jk.dsp > > > > > > > > > -rw-r--r-- 1 root sys 729 Feb 26 > > > > > > 09:20 mod_jk.la > > > > > > > > > -rw-r--r-- 1 root sys 102128 Feb 26 > > > > > > 09:20 mod_jk.lo > > > > > > > > > -rw-r--r-- 1 root sys 98392 Feb 26 > > > > > > 09:20 mod_jk.o > > > > > > > > > > > > > > > > > > I've got a mod_jk.o, but that's not the correct file. > > > It looks > > > > > > > > to me like > > > > > > > > > the right one should be libmod_jk.so.0.0.0, but I could > > > > > > be mistaken. > > > > > > > > > > > > > > > > > > --mikej > > > > > > > > > -=----- > > > > > > > > > mike jackson > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > From: Turner, John [mailto:[EMAIL PROTECTED] > > > > > > > > > > Sent: Wednesday, February 26, 2003 9:15 AM > > > > > > > > > > To: 'Tomcat Users List' > > > > > > > > > > Subject: RE: problems compiling and using mod_jk > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > buildconf.sh told me this: > > > > > > > > > > > > > > > > > > > > libtoolize --force --automake --copy > > > > > > > > > > aclocal > > > > > > > > > > automake -a --foreign -i --copy > > > > > > > > > > autoconf > > > > > > > > > > configure.in:24: AC_PROG_CPP was called > > before AC_PROG_CC > > > > > > > > > > > > > > > > > > > > Then I ran: ./configure > > > > > > --with-apxs=/usr/local/apache2/bin/apxs > > > > > > > > > > > > > > > > > > > > Everything went OK, then I ran make. > > Everything went OK, > > > > > > > > with the final > > > > > > > > > > result being: > > > > > > > > > > > > > > > > > > > > > > > > > > > > /usr/local/src/jakarta-tomcat-connectors-jk-1.2.2-src/jk/native/ap > > > > > > > > > > ache-2.0/. > > > > > > > > > > libs/mod_jk.so > > > > > > > > > > > > > > > > > > /usr/local/src/jakarta-tomcat-connectors-jk-1.2.2-src/jk/native/ap > > > > > > > > > > ache-2.0/m > > > > > > > > > > od_jk.so > > > > > > > > > > > > > > > > > > > > John > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > From: Mike Jackson [mailto:[EMAIL PROTECTED] > > > > > > > > > > > Sent: Wednesday, February 26, 2003 12:09 PM > > > > > > > > > > > To: Tomcat Users List > > > > > > > > > > > Subject: RE: problems compiling and using mod_jk > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I tried that, here's the output. For some reason it > > > > > > > can't find the > > > > > > > > > > > webserver. I was playing with the version > > in "native2", > > > > > > > it required > > > > > > > > > > > the --with-apxs2 option, but I haven't got > > that one to > > > > > > > > > > > compile yet, I'm > > > > > > > > > > > getting make errors. > > > > > > > > > > > > > > > > > > > > > > Configure output... > > > > > > > > > > > > > > > > > -------------------------------------------------------------- > > > > > > > > > > > -------------- > > > > > > > > > > > --------------- > > > > > > > > > > > # ./configure > > --with-apxs2=/usr/local/apache2/bin/apxs > > > > > > > > > > > loading cache ./config.cache > > > > > > > > > > > checking for a BSD compatible install... > > > > > > > > > > > scripts/build/unix/install-sh -c > > > > > > > > > > > checking whether build environment is sane... yes > > > > > > > > > > > checking whether make sets ${MAKE}... (cached) yes > > > > > > > > > > > checking for working aclocal... found > > > > > > > > > > > checking for working autoconf... found > > > > > > > > > > > checking for working automake... found > > > > > > > > > > > checking for working autoheader... found > > > > > > > > > > > checking for working makeinfo... missing > > > > > > > > > > > checking host system type... i586-sco-sysv5uw7.1.1 > > > > > > > > > > > checking build system type... i586-sco-sysv5uw7.1.1 > > > > > > > > > > > checking for ranlib... (cached) : > > > > > > > > > > > checking for gcc... (cached) gcc > > > > > > > > > > > checking whether the C compiler (gcc ) works... yes > > > > > > > > > > > checking whether the C compiler (gcc ) is a > > > > > > cross-compiler... no > > > > > > > > > > > checking whether we are using GNU C... (cached) yes > > > > > > > > > > > checking whether gcc accepts -g... (cached) yes > > > > > > > > > > > checking for ld used by GCC... (cached) > > /usr/ccs/bin/ld > > > > > > > > > > > checking if the linker (/usr/ccs/bin/ld) is GNU > > > > > > ld... (cached) no > > > > > > > > > > > checking for BSD-compatible nm... (cached) > > /usr/bin/nm -p > > > > > > > > > > > checking whether ln -s works... (cached) yes > > > > > > > > > > > loading cache ./config.cache within ltconfig > > > > > > > > > > > checking for object suffix... o > > > > > > > > > > > checking for executable suffix... (cached) no > > > > > > > > > > > checking for gcc option to produce PIC... -fPIC > > > > > > > > > > > checking if gcc PIC flag -fPIC works... yes > > > > > > > > > > > checking if gcc supports -c -o file.o... yes > > > > > > > > > > > checking if gcc supports -c -o file.lo... yes > > > > > > > > > > > checking if gcc supports -fno-rtti > > -fno-exceptions ... yes > > > > > > > > > > > checking if gcc static flag -static works... -static > > > > > > > > > > > checking if the linker (/usr/ccs/bin/ld) is > > GNU ld... no > > > > > > > > > > > checking whether the linker (/usr/ccs/bin/ld) > > > > > > supports shared > > > > > > > > > > > libraries... > > > > > > > > > > > yes > > > > > > > > > > > checking command to parse /usr/bin/nm -p > > output... ok > > > > > > > > > > > checking how to hardcode library paths into > > > > > > programs... immediate > > > > > > > > > > > checking for /usr/ccs/bin/ld option to reload > > > > > > object files... -r > > > > > > > > > > > checking dynamic linker characteristics... > > > > > > sysv5uw7.1.1 ld.so > > > > > > > > > > > checking if libtool supports shared libraries... yes > > > > > > > > > > > checking whether to build shared libraries... yes > > > > > > > > > > > checking whether to build static libraries... yes > > > > > > > > > > > checking for objdir... .libs > > > > > > > > > > > checking for dlfcn.h... (cached) yes > > > > > > > > > > > checking whether a program can dlopen itself... > > > (cached) no > > > > > > > > > > > creating libtool > > > > > > > > > > > loading cache ./config.cache > > > > > > > > > > > checking for gcc... (cached) gcc > > > > > > > > > > > checking whether the C compiler (gcc -g -O2 > > ) works... yes > > > > > > > > > > > checking whether the C compiler (gcc -g -O2 ) is a > > > > > > > > > > > cross-compiler... no > > > > > > > > > > > checking whether we are using GNU C... (cached) yes > > > > > > > > > > > checking whether gcc accepts -g... (cached) yes > > > > > > > > > > > checking for ld used by GCC... (cached) > > /usr/ccs/bin/ld > > > > > > > > > > > checking if the linker (/usr/ccs/bin/ld) is GNU > > > > > > ld... (cached) no > > > > > > > > > > > checking for test... (cached) /usr/bin/test > > > > > > > > > > > checking for rm... (cached) /sbin/rm > > > > > > > > > > > checking for grep... (cached) /sbin/grep > > > > > > > > > > > checking for echo... (cached) /usr/local/bin/echo > > > > > > > > > > > checking for sed... (cached) /usr/bin/sed > > > > > > > > > > > checking for cp... (cached) /sbin/cp > > > > > > > > > > > checking for mkdir... (cached) /usr/bin/mkdir > > > > > > > > > > > checking for libtool... (cached) > > /usr/local/bin/libtool > > > > > > > > > > > no apxs given > > > > > > > > > > > checking for target platform... unix > > > > > > > > > > > no apache given > > > > > > > > > > > configure: error: Cannot find the WebServer > > > > > > > > > > > > > > > > > -------------------------------------------------------------- > > > > > > > > > > > -------------- > > > > > > > > > > > --------------- > > > > > > > > > > > > > > > > > > > > > > --mikej > > > > > > > > > > > -=----- > > > > > > > > > > > mike jackson > > > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > From: Turner, John [mailto:[EMAIL PROTECTED] > > > > > > > > > > > > Sent: Wednesday, February 26, 2003 9:02 AM > > > > > > > > > > > > To: 'Tomcat Users List' > > > > > > > > > > > > Subject: RE: problems compiling and using mod_jk > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I think the culprit is the --with-apxs option, > > > now that I > > > > > > > > > > > think about it. > > > > > > > > > > > > > > > > > > > > > > > > Apache 1.3: --with-apxs=/path/to/apache/bin/apxs > > > > > > > > > > > > > > > > > > > > > > > > Apache 2.0: --with-apxs2=/path/to/apache2/bin/apxs > > > > > > > > > > > > > > > > > > > > > > > > I'm going to try it right now on RH 7.2 for > > > apache 2.0 and > > > > > > > > > > > see what's > > > > > > > > > > > > what...its been several weeks since I did it > > > and I need a > > > > > > > > refresher. > > > > > > > > > > > > > > > > > > > > > > > > John > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > From: Mike Jackson [mailto:[EMAIL PROTECTED] > > > > > > > > > > > > > Sent: Wednesday, February 26, 2003 11:53 AM > > > > > > > > > > > > > To: Tomcat Users List > > > > > > > > > > > > > Subject: RE: problems compiling and using mod_jk > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I don't see anything in particular, but I might > > > > > > be missing > > > > > > > > > > > > > something. The > > > > > > > > > > > > > only thing that looked worrisome was the "no > > > > > > apache given" > > > > > > > > > > > > > message output > > > > > > > > > > > > > from the configure script. But maybe one of > > > > > > you folks will > > > > > > > > > > > > > have a clue that > > > > > > > > > > > > > I don't. > > > > > > > > > > > > > > > > > > > > > > > > > > Here's the output from ./configure > > > > > > > > > > > > > --with-apxs=/usr/local/apache2/bin/apxs > > > > > > > > > > > > > > > > > > > -------------------------------------------------------------- > > > > > > > > > > > > > -------------- > > > > > > > > > > > > > ---------------- > > > > > > > > > > > > > # ./configure > > --with-apxs=/usr/local/apache2/bin/apxs > > > > > > > > > > > > > loading cache ./config.cache > > > > > > > > > > > > > checking for a BSD compatible install... > > > > > > > > > > > > > scripts/build/unix/install-sh -c > > > > > > > > > > > > > checking whether build environment is > > sane... yes > > > > > > > > > > > > > checking whether make sets ${MAKE}... > > (cached) yes > > > > > > > > > > > > > checking for working aclocal... found > > > > > > > > > > > > > checking for working autoconf... found > > > > > > > > > > > > > checking for working automake... found > > > > > > > > > > > > > checking for working autoheader... found > > > > > > > > > > > > > checking for working makeinfo... missing > > > > > > > > > > > > > checking host system type... > > i586-sco-sysv5uw7.1.1 > > > > > > > > > > > > > checking build system type... > > i586-sco-sysv5uw7.1.1 > > > > > > > > > > > > > checking for ranlib... (cached) : > > > > > > > > > > > > > checking for gcc... (cached) gcc > > > > > > > > > > > > > checking whether the C compiler (gcc ) > > works... yes > > > > > > > > > > > > > checking whether the C compiler (gcc ) is a > > > > > > > > cross-compiler... no > > > > > > > > > > > > > checking whether we are using GNU C... > > (cached) yes > > > > > > > > > > > > > checking whether gcc accepts -g... (cached) yes > > > > > > > > > > > > > checking for ld used by GCC... (cached) > > > /usr/ccs/bin/ld > > > > > > > > > > > > > checking if the linker > > (/usr/ccs/bin/ld) is GNU ld... > > > > > > > > (cached) no > > > > > > > > > > > > > checking for BSD-compatible nm... (cached) > > > > > > /usr/bin/nm -p > > > > > > > > > > > > > checking whether ln -s works... (cached) yes > > > > > > > > > > > > > loading cache ./config.cache within ltconfig > > > > > > > > > > > > > checking for object suffix... o > > > > > > > > > > > > > checking for executable suffix... (cached) no > > > > > > > > > > > > > checking for gcc option to produce PIC... -fPIC > > > > > > > > > > > > > checking if gcc PIC flag -fPIC works... yes > > > > > > > > > > > > > checking if gcc supports -c -o file.o... yes > > > > > > > > > > > > > checking if gcc supports -c -o file.lo... yes > > > > > > > > > > > > > checking if gcc supports -fno-rtti > > > > > > -fno-exceptions ... yes > > > > > > > > > > > > > checking if gcc static flag -static > > works... -static > > > > > > > > > > > > > checking if the linker (/usr/ccs/bin/ld) is > > > GNU ld... no > > > > > > > > > > > > > checking whether the linker (/usr/ccs/bin/ld) > > > > > > supports shared > > > > > > > > > > > > > libraries... > > > > > > > > > > > > > yes > > > > > > > > > > > > > checking command to parse /usr/bin/nm > > -p output... ok > > > > > > > > > > > > > checking how to hardcode library paths into > > > programs... > > > > > > > > immediate > > > > > > > > > > > > > checking for /usr/ccs/bin/ld option to > > reload object > > > > > > > files... -r > > > > > > > > > > > > > checking dynamic linker characteristics... > > > > > > sysv5uw7.1.1 ld.so > > > > > > > > > > > > > checking if libtool supports shared > > libraries... yes > > > > > > > > > > > > > checking whether to build shared > > libraries... yes > > > > > > > > > > > > > checking whether to build static > > libraries... yes > > > > > > > > > > > > > checking for objdir... .libs > > > > > > > > > > > > > checking for dlfcn.h... (cached) yes > > > > > > > > > > > > > checking whether a program can dlopen itself... > > > > > > (cached) no > > > > > > > > > > > > > creating libtool > > > > > > > > > > > > > loading cache ./config.cache > > > > > > > > > > > > > checking for gcc... (cached) gcc > > > > > > > > > > > > > checking whether the C compiler (gcc -g -O2 ) > > > > > > works... yes > > > > > > > > > > > > > checking whether the C compiler (gcc -g > > -O2 ) is a > > > > > > > > > > > > > cross-compiler... no > > > > > > > > > > > > > checking whether we are using GNU C... > > (cached) yes > > > > > > > > > > > > > checking whether gcc accepts -g... (cached) yes > > > > > > > > > > > > > checking for ld used by GCC... (cached) > > > /usr/ccs/bin/ld > > > > > > > > > > > > > checking if the linker > > (/usr/ccs/bin/ld) is GNU ld... > > > > > > > > (cached) no > > > > > > > > > > > > > checking for test... (cached) /usr/bin/test > > > > > > > > > > > > > checking for rm... (cached) /sbin/rm > > > > > > > > > > > > > checking for grep... (cached) /sbin/grep > > > > > > > > > > > > > checking for echo... (cached) > > /usr/local/bin/echo > > > > > > > > > > > > > checking for sed... (cached) /usr/bin/sed > > > > > > > > > > > > > checking for cp... (cached) /sbin/cp > > > > > > > > > > > > > checking for mkdir... (cached) /usr/bin/mkdir > > > > > > > > > > > > > checking for libtool... (cached) > > > /usr/local/bin/libtool > > > > > > > > > > > > > need to check for Perl first, apxs > > depends on it... > > > > > > > > > > > > > checking for perl... (cached) > > /usr/local/bin/perl > > > > > > > > > > > > > building connector for "apache-2.0" > > > > > > > > > > > > > checking for target platform... unix > > > > > > > > > > > > > no apache given > > > > > > > > > > > > > creating ./config.status > > > > > > > > > > > > > creating Makefile > > > > > > > > > > > > > creating apache-1.3/Makefile > > > > > > > > > > > > > creating apache-1.3/Makefile.apxs > > > > > > > > > > > > > creating apache-2.0/Makefile > > > > > > > > > > > > > creating apache-2.0/Makefile.apxs > > > > > > > > > > > > > creating common/Makefile > > > > > > > > > > > > > creating common/list.mk > > > > > > > > > > > > > creating jni/Makefile > > > > > > > > > > > > > > > > > > > -------------------------------------------------------------- > > > > > > > > > > > > > -------------- > > > > > > > > > > > > > ---------------- > > > > > > > > > > > > > > > > > > > > > > > > > > And here's config.log > > > > > > > > > > > > > > > > > > > -------------------------------------------------------------- > > > > > > > > > > > > > -------------- > > > > > > > > > > > > > ---------------- > > > > > > > > > > > > > This file contains any messages produced by > > > > > > compilers while > > > > > > > > > > > > > running configure, to aid debugging if > > configure makes > > > > > > > > a mistake. > > > > > > > > > > > > > > > > > > > > > > > > > > configure:694: checking for a BSD > > compatible install > > > > > > > > > > > > > configure:747: checking whether build > > > > > > environment is sane > > > > > > > > > > > > > configure:804: checking whether make > > sets ${MAKE} > > > > > > > > > > > > > configure:850: checking for working aclocal > > > > > > > > > > > > > configure:863: checking for working autoconf > > > > > > > > > > > > > configure:876: checking for working automake > > > > > > > > > > > > > configure:889: checking for working autoheader > > > > > > > > > > > > > configure:902: checking for working makeinfo > > > > > > > > > > > > > configure:994: checking host system type > > > > > > > > > > > > > configure:1015: checking build system type > > > > > > > > > > > > > configure:1035: checking for ranlib > > > > > > > > > > > > > configure:1065: checking for gcc > > > > > > > > > > > > > configure:1178: checking whether the C compiler > > > > > > (gcc ) works > > > > > > > > > > > > > configure:1194: gcc -o conftest > > conftest.c 1>&5 > > > > > > > > > > > > > configure:1220: checking whether the C compiler > > > > > > (gcc ) is a > > > > > > > > > > > > > cross-compiler > > > > > > > > > > > > > configure:1225: checking whether we are > > using GNU C > > > > > > > > > > > > > configure:1253: checking whether gcc accepts -g > > > > > > > > > > > > > configure:1296: checking for ld used by GCC > > > > > > > > > > > > > configure:1358: checking if the linker > > > > > > > > (/usr/ccs/bin/ld) is GNU ld > > > > > > > > > > > > > configure:1374: checking for BSD-compatible nm > > > > > > > > > > > > > configure:1410: checking whether ln -s works > > > > > > > > > > > > > ltconfig:603: checking for object suffix > > > > > > > > > > > > > ltconfig:604: gcc -c -g -O2 conftest.c 1>&5 > > > > > > > > > > > > > ltconfig:776: checking if gcc PIC flag > > -fPIC works > > > > > > > > > > > > > ltconfig:777: gcc -c -g -O2 -fPIC -DPIC > > > conftest.c 1>&5 > > > > > > > > > > > > > ltconfig:829: checking if gcc supports > > -c -o file.o > > > > > > > > > > > > > ltconfig:830: gcc -c -g -O2 -o out/conftest2.o > > > > > > > conftest.c 1>&5 > > > > > > > > > > > > > ltconfig:862: checking if gcc supports > > -c -o file.lo > > > > > > > > > > > > > ltconfig:863: gcc -c -g -O2 -c -o conftest.lo > > > > > > conftest.c 1>&5 > > > > > > > > > > > > > ltconfig:914: checking if gcc supports -fno-rtti > > > > > > > -fno-exceptions > > > > > > > > > > > > > ltconfig:915: gcc -c -g -O2 -fno-rtti > > > -fno-exceptions -c > > > > > > > > > > > conftest.c > > > > > > > > > > > > > conftest.c 1>&5 > > > > > > > > > > > > > ltconfig:958: checking if gcc static flag > > > -static works > > > > > > > > > > > > > ltconfig:959: gcc -o conftest -g -O2 -static > > > > > > > conftest.c 1>&5 > > > > > > > > > > > > > ltconfig:1653: checking if > > global_symbol_pipe works > > > > > > > > > > > > > ltconfig:1654: gcc -c -g -O2 conftest.c 1>&5 > > > > > > > > > > > > > ltconfig:1657: eval "/usr/bin/nm -p conftest.o > > > > > > | sed -n -e > > > > > > > > > > > > > *[ ]\([BCDEGRST]\)[ ][ ]*\(\ > > > > > > > > > > > > > )\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' > > > > > > > conftest.nm" > > > > > > > > > > > > > ltconfig:1709: gcc -o conftest -g -O2 > > > > > > -fno-builtin -fno-rtti > > > > > > > > > > > > > -fno-exceptions > > > > > > > > > > > > > conftest.c conftstm.o 1>&5 > > > > > > > > > > > > > ltconfig:2488: checking for dlfcn.h > > > > > > > > > > > > > ltconfig:2526: checking whether a program can > > > > > > dlopen itself > > > > > > > > > > > > > configure:1598: checking for gcc > > > > > > > > > > > > > configure:1711: checking whether the C > > > compiler (gcc -g > > > > > > > > > > > -O2 ) works > > > > > > > > > > > > > configure:1727: gcc -o conftest -g -O2 > > > > > > conftest.c 1>&5 > > > > > > > > > > > > > configure:1753: checking whether the C > > > compiler (gcc -g > > > > > > > > -O2 ) is a > > > > > > > > > > > > > cross-compiler > > > > > > > > > > > > > configure:1758: checking whether we are > > using GNU C > > > > > > > > > > > > > configure:1786: checking whether gcc accepts -g > > > > > > > > > > > > > configure:1830: checking for ld used by GCC > > > > > > > > > > > > > configure:1892: checking if the linker > > > > > > > > (/usr/ccs/bin/ld) is GNU ld > > > > > > > > > > > > > configure:1911: checking for test > > > > > > > > > > > > > configure:1948: checking for rm > > > > > > > > > > > > > configure:1985: checking for grep > > > > > > > > > > > > > configure:2022: checking for echo > > > > > > > > > > > > > configure:2059: checking for sed > > > > > > > > > > > > > configure:2096: checking for cp > > > > > > > > > > > > > configure:2133: checking for mkdir > > > > > > > > > > > > > configure:2170: checking for libtool > > > > > > > > > > > > > configure:2224: checking for perl > > > > > > > > > > > > > configure:2339: checking for target platform > > > > > > > > > > > > > > > > > > > -------------------------------------------------------------- > > > > > > > > > > > > > -------------- > > > > > > > > > > > > > ---------------- > > > > > > > > > > > > > > > > > > > > > > > > > > --mikej > > > > > > > > > > > > > -=----- > > > > > > > > > > > > > mike jackson > > > > > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > > From: Turner, John [mailto:[EMAIL PROTECTED] > > > > > > > > > > > > > > Sent: Wednesday, February 26, 2003 8:48 AM > > > > > > > > > > > > > > To: 'Tomcat Users List' > > > > > > > > > > > > > > Subject: RE: problems compiling and > > using mod_jk > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Maybe we should revisit the "bunch of > > libtoolize > > > > > > > > > > > > > errors"...I was able to > > > > > > > > > > > > > > ignore them, but perhaps they meant something > > > > > > on your OS. > > > > > > > > > > > > > You're using > > > > > > > > > > > > > > UnixWare, right? > > > > > > > > > > > > > > > > > > > > > > > > > > > > What does the configure log/status file > > > say? Anything > > > > > > > > > > > suspicious? > > > > > > > > > > > > > > > > > > > > > > > > > > > > John > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > > > From: Mike Jackson > > [mailto:[EMAIL PROTECTED] > > > > > > > > > > > > > > > Sent: Wednesday, February 26, 2003 11:46 AM > > > > > > > > > > > > > > > To: Tomcat Users List > > > > > > > > > > > > > > > Subject: RE: problems compiling and > > using mod_jk > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > How should I proceed? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --mikej > > > > > > > > > > > > > > > -=----- > > > > > > > > > > > > > > > mike jackson > > > > > > > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > > > > From: Turner, John > > [mailto:[EMAIL PROTECTED] > > > > > > > > > > > > > > > > Sent: Wednesday, February 26, 2003 8:37 AM > > > > > > > > > > > > > > > > To: 'Tomcat Users List' > > > > > > > > > > > > > > > > Subject: RE: problems compiling > > and using mod_jk > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > That's munged up somehow. I've never had > > > > > > to do Step > > > > > > > > > > > > > #7, the file > > > > > > > > > > > > > > > > that I get > > > > > > > > > > > > > > > > resulting from "make" is called mod_jk.so. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > John > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > > > > > From: Mike Jackson > > > [mailto:[EMAIL PROTECTED] > > > > > > > > > > > > > > > > > Sent: Wednesday, February 26, > > 2003 11:33 AM > > > > > > > > > > > > > > > > > To: Tomcat Users List > > > > > > > > > > > > > > > > > Subject: problems compiling and > > using mod_jk > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Ok, here's what I've done: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1) grab latest connector sources > > > > > > > > > > > > > > > > > 2) cd $SRC/jk/native > > > > > > > > > > > > > > > > > 3) ./buildconf.sh > > > > > > > > > > > > > > > > > 4) ./configure > > > > > > > > > > --with-apxs=/usr/local/apache2/bin/apxs > > > > > > > > > > > > > > > > > 5) make > > > > > > > > > > > > > > > > > 6) cd apache-2.0 > > > > > > > > > > > > > > > > > 7) cp libmod_jk.so.0.0.0 > > > > > > /usr/local/apache2/modules > > > > > > > > > > > > > > > > > 8) cd /usr/local/apache2/modules > > > > > > > > > > > > > > > > > 9) ln -s libmod_jk.so.0.0.0. mod_jk.so > > > > > > > > > > > > > > > > > 10) > > /usr/local/apache2/bin/apachectl start > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > And what I got was: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1) bunch of libtoolizer errors, but > > > according to > > > > > > > > > > > > > > > > > http://www.johnturner.com/howto I don't > > > > > > have to worry > > > > > > > > > > > > > about that. > > > > > > > > > > > > > > > > > 2) # bin/apachectl start > > > > > > > > > > > > > > > > > Syntax error on line 232 of > > > > > > > > > > > > > /usr/local/apache2/conf/httpd.conf: > > > > > > > > > > > > > > > > > Cannot load > > > > > > /usr/local/apache2/modules/mod_jk.so into > > > > > > > > > > > > > > > server: dynamic > > > > > > > > > > > > > > > > > linker: /usr/local/apache2/bin/httpd: > > > > > > > relocation error: > > > > > > > > > > > > > > > > > symbol not found: > > > > > > > > > > > > > > > > > ap_content_type_tolower; > > referenced from: > > > > > > > > > > > > > > > > > /usr/local/apache2/modules/mod_jk.so > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --mikej > > > > > > > > > > > > > > > > > -=----- > > > > > > > > > > > > > > > > > mike jackson > > > > > > > > > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > > > > > > > > > To unsubscribe, e-mail: > > > > > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > For additional commands, e-mail: > > > > > > > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > > > > > > > > To unsubscribe, e-mail: > > > > > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > For additional commands, e-mail: > > > > > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > > > > > > > To unsubscribe, e-mail: > > > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > For additional commands, e-mail: > > > > > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > > > > > > To unsubscribe, e-mail: > > > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > For additional commands, e-mail: > > > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > > > > > To unsubscribe, e-mail: > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > For additional commands, e-mail: > > > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > > > > To unsubscribe, e-mail: > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > For additional commands, e-mail: > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > > > To unsubscribe, e-mail: > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > For additional commands, e-mail: > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > > To unsubscribe, e-mail: > > > > > > [EMAIL PROTECTED] > > > > > > > > > > For additional commands, e-mail: > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > To unsubscribe, e-mail: > > > > > > [EMAIL PROTECTED] > > > > > > > > > For additional commands, e-mail: > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > To unsubscribe, e-mail: > > > [EMAIL PROTECTED] > > > > > > > > For additional commands, e-mail: > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > To unsubscribe, e-mail: > > [EMAIL PROTECTED] > > > > > > > For additional commands, e-mail: > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > To unsubscribe, e-mail: > > [EMAIL PROTECTED] > > > > > > For additional commands, e-mail: > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > To unsubscribe, e-mail: > > [EMAIL PROTECTED] > > > > > For additional commands, e-mail: > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > For additional commands, e-mail: > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
