> floppy drive(s): fd0 is 1.2m, fd1 is 1.44m You have your 5.25" drive on A and your 3.5" drive on B. Your BIOS is probably swapping them so that when booting A is B and B is A. Tomsrtbt requires that fd0 be your 1.44m drive. The bios switch or whatever will not work. My recomendation is that you open the box and swap the cable between the two drives and tell the bios about it. There is no reason I'm aware that you want it the way you have it, right now your A drive is the 5.25 and your B drive is the 1.44, but your bios is somehow letting you boot from B, probably pretending to be A, but not pretending well enough. If you really want to make a tomsrtbt that will work, it would ONLY work on this machine, and be broken on all other machines. You would have to run the unpack.s script, edit the lilo configuration in buildit.s, edit the 2/etc/rc.M script, run the buildit.s script, etc. But the best solution is just to fix the cable so that your 3.5" 1.44M floppy is really on A instead of B. -Tom
