You can kludge it easily. In general, when a pcmcia card isn't found,
look for the message when you do "pcmcia start" about what it thinks it
saw. Do pcmcia stop, then edit the /etc/pcmcia/config file on tomsrtbt.
In this case, you would find the section that says:
card "3Com 3c589D Ethernet"
version "3Com Corporation", "3C589D"
bind "3c589_cs"
and _add_ a section like:
card "3Com 3c589E Ethernet"
version "3Com Corporation", "3C589E"
bind "3c589_cs"
-Tom
On Mon, 25 Oct 1999, Nicolas Viers - SCI - wrote:
> Date: Mon, 25 Oct 1999 13:44:26 +0200
> From: Nicolas Viers - SCI - <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Tomsrtbt and driver 3c589E (Pcmcia 3com)
>
> Hello,
> i try to make working tomsrtbt with a 3com 3c589E pcmcia
> card, but �pcmcia start" failed. This model is not recognize.
> With a 3c589D is ok.
> Do you know where i can find a driver for this card who works
> fine with tmsrtbt distrib ?
>
>
> Thank a lot.
> ____________________________________________________________
>
> Nicolas Viers | Service Commun Informatique
> M�l: [EMAIL PROTECTED] | 123, avenue Albert Thomas
> | 87060 Limoges cedex
> Tel: 05-55-45-77-09 | Fax: 05-55-45-75-95
> http://www.unilim.fr/sci
> ____________________________________________________________
>
