Hi Freddy I can't answer your question directly but can report some results using something other then twisted two wire or WD-1A for reverse Beverages.
I found a 500 foot spool of lamp cord. This was not two wire zip cord but the three wire cord with a very tight twist. I think sold for shop lights. I got very poor results in the reverse direction using two wires going or two wires coming back or one wire just floating. As Herb mentioned the wire impedance may have been too far off for the transformer or the transformer/reflector module had a problem. It still seems to me this three wire twist should have worked but it didn't. ----- down hill Some time back I asked if going down hill with a Beverage works. Mixed reports as can be expected. I built two 500 ft beverages this fall both going down hill, maybe a 75-100 foot grade. Both work excellent, with signals that pop out of the noise when switching from the full size vertical. I also built another but this one didn't work well. This grade was very steep, 200 feet but I didn't take the time to prove it was the grade that was too steep or something else wrong. 73 Rich KL7RA _______________________________________________ UR RST IS ... ... ..9 QSB QSB - hw? BK
