Paul N0AH, is having "fun" tuning his MA160V vertical antenna: <snip> Now, do I just use the Pro's III tuner or the Amidon UnUn to minimize SWR at the feedpoint-
<snip> Paul, You could also try 10 or 12 turns of #12 or 14 gauge wire, 2" diam across the feed point and ground. Spread/compress the turns to get the lowest SWR/best match. It's fastest if you have an antenna bridge/analyzer of some type. Your bandwidth will be rather narrow but then you could touch it up with the tuner. This is what I do with a H.B. 40 ft vert for 160/75/40. I go for the best macth on 160, and let the other bands be. As long as the resonance is mid point of where I operate on all three bands, everyone is happy: Rig/tuner/ME!!!!!!!!!!!!! I can usually wander 30 or 40 kc........ um, make that KHZ, each side of resonance without a lot of problems. I'm no antenna Garu, so with that being said, YMMV. 73 and good luck with the project. K9WN Jake _______________________________________________ UR RST IS ... ... ..9 QSB QSB - hw? BK
