My question is whether a perimeter wire attached at the corners will be helpful, or should I use individual perimeter wires each connected to the distant end of each short radial to create four 53' bent radials? Or, I should have a single wire that is attached to the perimeter wire for a 146' one-turn spiral radial? I'm not completely limited to four wires, I could add more inside the box, but four is the most XYL-friendly option. Thanks in advance for your responses. Paul, K5AF
Paul creation of even a skeleton capacity hat to ground with a perimeter wire connected to the ends of the short radials IMHO would be better then a single bent wire. Herb, KV4FZ _______________________________________________ UR RST IS ... ... ..9 QSB QSB - hw? BK
