Well first of all dont expect instant gratification on here as there are usually delays in a post appearing.
As far as the question you can phase them to get figure 8 patterns broadside and end fire. I had a pair of 80M 1/4 wave spaced 1/4 wave also fed as 1/2 waves on 40M at a prior QTH. Carl KM1H ----- Original Message ----- From: "Dale Long" <[email protected]> To: <[email protected]> Sent: Tuesday, November 22, 2011 9:16 AM Subject: Topband: no response to query: feeding phased verticals at halfwave spacing > Gentlemen: > > > > I am not one who thinks the whole world revolves around my concerns. And > I > recognize that some research on my part may be necessary. ( I have read > ON4UN's Low-Band Dxing) > > > > But I do think this is a reasonable question, and think that there are > knowledgeable folks who might provide some advice. Unfortunately I have > never done any antenna modeling. > > > > Please let me know your thoughts. > > > > Thanks, > > > > Dale N3BNA > > > > From: Dale Long [mailto:[email protected]] > Sent: Saturday, November 19, 2011 3:05 PM > To: '[email protected]' > Subject: feeding phased verticals at half wave spacing > > > > Gentlemen: > > > > I have been told repeatedly that phased verticals should be spaced 1/4 > wavelength apart. Ok, I am willing to accept that. > > > > My question is if you have verticals that are 1/2 wave apart, would it not > give some pattern, whatever that should be? > > > > If you were looking for an endfire pattern how should you feed such > verticals? > > > > If you have specific questions, you may contact me directly at > [email protected] > > > > Thanks and 73, > > > > Dale N3BNA > > _______________________________________________ > UR RST IS ... ... ..9 QSB QSB - hw? BK > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 10.0.1411 / Virus Database: 2092/4032 - Release Date: 11/22/11 > _______________________________________________ UR RST IS ... ... ..9 QSB QSB - hw? BK
