I've had very good success with a 24' end-loaded vertical dipole on 40M. I'm wondering how principles that I've used there might apply to 160 and 80M. First of all, end hats can be quite small and still be very effective, especially if a perimeter wire is installed around the spokes. In fact, it is generally accepted that a perimeter wire can reduce the radius of a top hat by 30 to 40% compared to one without. Those on my vertical dipole are only 4' square. Can/should this principle be applied to short elevated radials? Will a perimeter wire help or hurt performance? I have used 16 30-35' radials on the ground with fair success in the past. If I go elevated, I can go 30' in at least a few directions with no complaints from the XYL. Should I place a perimeter wire that connects the ends of my radials and therefore make the radial field appear electrically larger? Alternatively, could I install "fat" radials that could be deployed radially from the vertical and form a "fat" pie-shaped radial consisting of two 30' foot pieces connected at the distant end along the fence line with a 10-15' connecting wire. Would that be a better alternative to several 30' radials by themselves? Yet another option would be to deploy T shaped radials. Would a few of these (longer electrical length) be better than several shorter radials? My goal is to have an effective system with as little visual distraction as possible. I'm not aware of any research done on these questions, if you have any references, please let me know. Conjecture, based on experience, is certainly encouraged! 73, Paul, K5AF _______________________________________________ Remember the PreStew coming on October 20th. http://www.kkn.net/stew for more info.
