First, they would be fools or have idiots for engineers to have more than 120 radials. The only real reason they use 90 radials or so is it sometimes gets them out of expensive proof-of-performance measurements.
Or, (1) to compensate for field degradation over the course of several decades. In the case of WLS in Chicago, they laid 120 radials on top of an old set of 120 radials. The base Z did not change, nor was it expected to. And (2), to better stabilize a pattern in the case of a DA where soil moisture/content changes with seasons.
A typical half-wave BC tower is in the several hundred ohm range because of tower thickness. They are almost never over 1000 ohms.
Right, typically a couple hundred ohms. Modeling the base Z of a thick broadcast tower is very difficult with MoM software. Changes in thickness can result in large base Z changes.
Paul, W9AC _______________________________________________ Topband reflector - [email protected]
