Recently I made an improvement at this QTH after having Sprint 3g which was not even a joke....in my opinion, those guys should be arrested for false advertising. I got an Apple IPhone5 and use the 'personal hotspot' feature to provide ATT 4G LTE service to my (this) computer. I got rid of all the outside antennas, cables and equipment that captivate me to a desk. Now....I am fully portable and it costs less as well. My service with ATT has 10gb of data per month....I do everything and go anywhere with this setup on the internet and I haven't even got close to the 10gb limit. I just tested the speed....it is just over 20mbps download. There are no modules or anything else like cables, antennas etc that connect to the computer.....the IP5 and the computer talk over the WIFI built into the computer. I'm very happy with its performance and convenience.....and there is absolutely no interference from/to this setup on any band or on broadcast AM radio which I listen to a lot. Highly recommended.
Dave Harmon K6XYZ[at]sbcglobal[dot]net Sperry, Ok. -----Original Message----- From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Brian Sarkisian Sent: Monday, July 29, 2013 12:15 PM To: topband@contesting.com Subject: Topband: Wireless Internet RFI Issue I recently had an internet wireless antenna/unit installed as our DSL was painfully slow. Now I notice RFI in the AM broadcast band and into the 160 meter band. There may more RFI issues on other bands however at this point I haven't noticed anything. I see that Fair-Rate makes a series of "New Low Frequency Suppression Cable Component ferrites, though I am not sure what I should purchase. It looks like that I should be looking for a "certain impedance" for a particular frequency. Any help would be appreciated. 73 de Brian, KG8CO _________________ Topband Reflector _________________ Topband Reflector