I've just used strips of sheet copper cut with snips for "flat" wire. I purchased a sheet from a Hobby Lobby store. Their ads usually include a 20% off coupon good for just about any one item at their stores.
73, Charlie, N0TT On Mon, 16 Sep 2013 01:39:46 +0000 (UTC) [email protected] writes: > > > I know this may be a little off topic BUT.... I am looking for some > flat wired to wind an edge wound inductor. I am guessing that it > needs to be something like an eight of an inch on the narrow side by > maybe three eights of in inch on the long or flat side. This will > allow my roller wheel to ride on the inside of the inductor to > change inductance. > > Now for the rub. I cant find anyone that makes wire like this. I > know it is made because others have made inductors using this kind > of wire. Oh and it has to be silver plated if possible. > > These coils are to be part of a balanced tuner and yes I know I can > purchase coils but I want consistency since I am going to build > several of these units. > > Any and all help appreciated. > > Thanks Jim WA3MEJ > > > http://www.qsl.net/wa3mej/index.htm > _________________ > Topband Reflector _________________ Topband Reflector
