Hello Dear Topbanders, I had the chance to test the Spitfire antenna during the CQWWSSB.
I installed it to cover initially one direction. I had no problem to tune the elements to 1840 using a source signal from the back. Reflector ended at 1855 and director 2050, both tuned to max attenuation to the back as suggested by designers. At first I was delighted because I got f/b at ground level of more than 20db across 25 Kc but surprise came when I could not notice any improvement in the front gain switching on/off the elements to medium distances (Brazil) or long distance like Europe where it was pointed to (and same line of Brazil). I measured FS at 300 mts at ground level and I only detect 1db maximun change Reading ON4UN book, It looks like because of its configuration, the main lobe is shifted upward a bit, so I could think that because of that I measured very little at ground level but not noticing any detectable change at Brazil (3000Km) nor Europe (>10000Km) it really makes me wonder if it is working at all. Before changing the project to other direction, I would like to hear your opinion and or suggestions. Many thanks in advance.... Eddie, LU2DKT _________________ Topband Reflector
