I have a question about using the noise bridge. I have used it cut stubs to 1/4
wavelength using 52 ohm cable with no problems. I now need some stubs using 75
ohm cable which I have on hand.
Will the same procedure work for 75 ohm that works for 52 ohm cable, or will
the different impedance need to be accounted for. I started to cut cable and
this question came to me. My first thought is that it will work fine, but I am
not sure. I did some searches on the web but found nothing about it. Any help
would be appreciated.
Thanks, Pat Armstrong KF5YZ
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
