I can find faults on 3000 ft cable runs within a few feet, so I'm sure you
could get within that range.
That will save you time.
----- Original Message -----
From: "Gary Smith" <[email protected]>
To: <[email protected]>
Sent: Wednesday, February 19, 2014 10:25 AM
Subject: Re: Topband: Coax issues
Thank you all for the replies, I didn't know the 259B will do this.
I'm off to remove the antenna from the coax and will come back in try
and follow the directions in the manual I downloaded. I bought the
259B on fleabay as a LCD replacement to the MFJ-207 SWR analyzer for
pruning my antenna wires and I've never used it for anything else.
Silver lining: This is a perfect day a test of my Weller PSI100K
Portasol butane soldering iron I got last summer. I've got a couple
hand warmers started to keep the butane warm while I'm outside, the
butane pressure drops with cold temps. I don't have 350 feet of
extension cord and could never repair it outside without something
portable.
Here's hoping it's not to hard to follow the instructions accurately,
find the bugger & then resolve. I've got a bad right foot so the less
trips out into the snow will make it easier on me.
thanks!
Gary
KA1J
---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3705/7106 - Release Date: 02/19/14
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
