I've been plagued by a problem I have finally identified but now need help in resolving. I thought it was birdies but realized it had an external component when I removed my antennas and they went away.
I'm in a location where I can't put up a tower but have made extensive use of wires in trees and use my 160M Inv-L for 160, 20, 15, 12 & 10 meters. the 80M mostly vertical wire also serves for 80, 17, and 12 meters. I have been hearing birdies on 18 meters for a long time but recently I bought a P3 to fit the K3 and now can see much more than my alone ears noticed before. I only used CW and never listened to the signals and only bypassed them. When I had the 160M ant in line & switched to 18M, I saw lines 5KHz apart on the P3. Usually I only have the 80M antenna in-line on 17M so this was a real discovery for me. Seeing that the interference was audio I listenbed on AM & could hear audio which using the 80M ant & narrow CW filters, I never had before. With the 160M antenna what used to be an irritation was now overwhelming interference to reception. And what I thought were birdies were the centers of the carrier on regularly spaced narrow AM signals generated in the circuitry. One station was an AM station from Puerto Rico and the other I never did listen long enough to, to hear the call but was stateside. Switching in the 80M antenna makes the lines on the P3 far less aggressive and switching to a 30M vertical, I see no lines whatsoever. I took two waterfall screenshots from the P3 and birdie1.jpg is showing 11KHz on each side of center and birdie2.jpg shows 100KHz on each side of center. Each line is 5 KHz. http://doctorgary.net/birdie1.jpg http://doctorgary.net/birdie2.jpg These are the worst on the transmit antenna but also am hearing them to a lesser extent on the HI-Z Triangular antennas as well. It seems like I should have a filter in line to block the BCB signals but then that would block 160 signals as well. I use the HI-Z for lowband work and certainly don't want to block those signals & the same goes if I put a filter in the coax for my transmit antenna. Any suggestions of some kind of filter so I can get rid of these? Gary KA1J --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com _________________ Topband Reflector Archives - http://www.contesting.com/_topband
