-----Original Message----- From: Charlie [mailto:[email protected]] Sent: Monday, June 02, 2014 1:13 AM To: 'W0MU Mike Fatchett' Subject: RE: Topband: Using 80m 1/4 vertical on 160
Hi, Mike Could you add 1 or 2 top wires and turn it into an inverted-L or Tee for topband? Or you could add an 80m trap at the top followed by enough horizontal (or sloped) wire to resonate on 160, while preserving the 80 m function? Any of those configurations should work well on 160, I think. Probably need to add 1 or 2 160m radials, I expect - even if you have to bend them. (When, you say "1/4 wave vertical" I'm taking that literally.) Charlie, K4OTV -----Original Message----- From: Topband [mailto:[email protected]] On Behalf Of W0MU Mike Fatchett Sent: Monday, June 02, 2014 12:50 AM To: [email protected] Subject: Topband: Using 80m 1/4 vertical on 160 Is this worth trying? -- Mike W0MU _________________ Topband Reflector Archives - http://www.contesting.com/_topband --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com _________________ Topband Reflector Archives - http://www.contesting.com/_topband
