There is some data on this page:
http://www.w0qe.com/Technical_Topics/small_signal_relays_at_rf.html
I have used the RTD140xx series Schrack/Tyco for years in primarily RTTY
contesting duty at the KW power level - all without fail. But I have not
conducted BDV testing on those relays.
73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie
-----Original Message-----
From: Jim Brown
Sent: Thursday, October 09, 2014 12:38 PM
To: topband@contesting.com
Subject: Re: Topband: TX relays
On Thu,10/9/2014 6:46 AM, Tom W8JI wrote:
Because there are many things that go into relay selection that do not
show on a data sheet, I always dissect and test relays.
Thanks for an excellent exposition of the issues. Now how about the
other half of the question -- part numbers for relays that meet the
need? This reflector (and the spirit of ham radio) is about SHARING
information.
73, Jim K9YC
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
