For my RG-6 beverage I used a marline hitch spread out over a couple of
feet and then taped it up after it was in tension.
73, Glenn - KD0Q
On 1/30/2015 10:57, Tracey Gardner wrote:
I have a follow on question from my non-invasive tree attachment
question.
I am running RG58 through a hedge with the intention of using it as a
2-way Beverage.
I am scratching my head as to how to attach some poly rope close to
the ends of the RG58 to enable it to be lightly tensioned.
I could use a fleeting cable grip if I could find one small enough.
If it was normal stranded wire I would just use duplex cable grips and
an insulator, but as it is coax, I don't see that as an option.
All suggestions will be gratefully received.
73s Tracey G5VU
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
