It is shown with RCA connectors. Is it available with
F?
BNC?
I have generally found RCA connectors to be unsatisfactory in the long term for a variety
of reasons generally revolving around the "Astro" plate hard nickel surfaces. A large
number of 160 receive antenna systems are built with type F connectors with generally good
results - as well as it being a threaded connector instead of a slip on (read: slip off in
the middle of the contest)
thanks
Robin WA6CDR
---- Original Message -----
From: "Jay Terleski" <[email protected]>
To: <[email protected]>
Sent: Monday, October 12, 2015 09:03
Subject: Topband: High Pass Filter
"Where can I find a schematic for a good high pass filter that rolls off at
1700 kHz?"
Hopefully with permission of the moderator I suggest you might look at our
inexpensive filters. The specs are good even at 1.7 MHz
http://arraysolutions.com/Products/AS160HPF.htm
Jay Terleski
President
Array Solutions
214 954 7140
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
