Mike, The closest element (Hi-Z element #2) of my Hi-Z 4sq is 70 ft from my 1/4 wave 160m hat loaded vertical & it has worked fine for 3 years. I am feeding the feedpoint at 134 ft up the antenna.
Bill N3RR On Nov 15, 2015 12:33 PM, Mike Greenway <[email protected]> wrote: > > I have used the HI Z rx system and also the DXE ones. HI Z said in the past > no need for a sequencer to get power off the amps if the xmit ant was close > to the rx system antennas. Close I would say 60 foot. DXE has always > suggested using a sequencer to get power off the amps during xmit. I am > going to be forced to move a DXE system within 65 ft or so of my 160 vertical > and wonder if anyone has had any experience of using the DXE without a > sequencer close to their xmit antenna. Just hate to install one more thing I > could get around but will if absolutely necessary. I know moving it closer > is not an ideal situation but you do what you have to. Any input? 73 Mike > K4PI > _________________ > Topband Reflector Archives - http://www.contesting.com/_topband _________________ Topband Reflector Archives - http://www.contesting.com/_topband
