I acquired some Commsphere Flooded F-11 type coax. I installed compression Type UHF connectors on the coax. I solder the copperclad center conductor to the center pin. The shield braid is connected via compression.
The UHF connectors are working but I am concerned about the reliability because the shield braid has about 50% coverage. I'd like to try F type connectors. Will the smaller center conductor pin of the F type connector handle power when transmitting? I presently use 100 watts but may use an amp in the future. Mike N2MS _________________ Topband Reflector Archives - http://www.contesting.com/_topband
