Bill, Given the info that you have provided, it sounds like you dont have lots of room for almost anything if the room needed is radial field in certain directions from the tower. And re guying the tower is out as well.
My suggestion for a simple job, is to have someone climb the tower and put a pulley and rope at the top. An inverted vee with a peak at 90 ft and the end of the antenna legs at least 50 ft off the ground will do a reasonable job for you. Alternatively, an inverted L, with 4 elevated radials at least 10 ft off the ground 15 ft is better will do pretty well with the kink of the L at 90 feet. I would align the elevated radials so that only one is needed in the difficult overbrush. Then I would measure out 125 ft of 16 AWG insulated wire, and launch the radial out of the pricker brush with a slingshot. Ed N1UR I have 2 T top verticals with tops at 80 ft and 45 ¼ wave radials under each end fire into EU and switched OMNI for everybody else. Takes up a lot of real estate but works FB. _________________ Topband Reflector Archives - http://www.contesting.com/_topband
