JC, The shielded 50 ohm load is placed at the RX antenna feedpoint or at the radio's RX input?
Kris N5KM ---- original message ----- Date: Thu, 24 Mar 2016 08:14:35 -0400 From: "JC" <[email protected]> To: "'Mark van Wijk, PA5MW'" <[email protected]>, "'william radice'" <[email protected]>, <[email protected]> Subject: Re: Topband: Post contest season: TX antenna vs RX antenna cros-stalk. What do you do? >>I was wondering what people do besides the obvious 'kill the TX antenna input during RX mode' ?<< <snip> The test to know if you have this problem is simple, disconnect the RX antenna and use a 50ohms, shielded load to terminate the RX input. Tune on the AM band and if you hear strong BC signals coming from you TX antenna during RX with the RX port terminated with 50 ohms you have some homework to do. <snip> _________________ Topband Reflector Archives - http://www.contesting.com/_topband
