Gabriel, I have an older BevPro-1 with a 580 ft element. The feed point is near one end and the element is installed 10 ft off the ground using electric fence insulators on available trees. The improvement in S/N ratio, directivity and gain appear to be what is expected with that element length. It has been quite useful on 160m-30m.
Hope that helps. 73, Glenn - KD0Q On Mon, Sep 5, 2016 at 4:50 AM, Gabriel - EA6VQ <[email protected]> wrote: > Hi, > > Anyone using the BevFlex-4 antenna (or the former version, the BevPro.1) > could share his impressions? > > I am thinking of setting up one (possibly two in the future) for testing RX > on 160m (and possibly 80, 60 and 40m too) in the Beverage configuration. > Having the house in the middle of my property this antenna would make me > easier the installation compared to a standard Beverage as the feed point > does not need to be at the end of the antenna. > > 73. Gabriel - EA6VQ > > > _________________ > Topband Reflector Archives - http://www.contesting.com/_topband > > _________________ Topband Reflector Archives - http://www.contesting.com/_topband
