I have heard that a 450 ohm ladder Beverage can be fed in the center or even off center. This is something I would like to do but have never seen any write up on the way it is done. I presume ti would require a reflection transformer and ground on each end. But the means of feed the wires at the center or off center has be puzzled. Anyone who has done this with a two wire reversible....please lewt me know.
On 4/14/2017 9:58 AM, Alan Swinger wrote: I checked out the JK Antenna web site and the system looks good and sounds like it performs well. Have there been any side-by-side comparisons w/ a standard 2 wire 450 ohm Beverage? Tks - Alan K9MBQ -----Original Message----- From: Ned Mountain <[email protected]> <[email protected]> Sent: Apr 13, 2017 7:35 PM To: [email protected] Subject: Topband: Bev-Flex 4 Beverage system I have already received several e mails since my posting. The data sheets and specs are on the JK antenna website. (jkantennas..com) Here is a link to a video presentation I did some time back to one of the local clubs regarding the system. https://www.youtube.com/watch?v=HZiQXihUvIo<https://www.youtube.com/watch?v=HZiQXihUvIo&feature=youtu.be> <https://www.youtube.com/watch?v=HZiQXihUvIo&feature=youtu.be> &feature=youtu.be Ned WC4X Can you explain how do hook up a two wire ladder line Beverage with a center feed? Thanks, Herb, KV4FZ Ned Mountain [email protected] 770 823 4205 <(770)%20823-4205> (M) _________________ Topband Reflector Archives - http://www.contesting.com/_topband _________________ Topband Reflector Archives - http://www.contesting.com/_topband _________________ Topband Reflector Archives - http://www.contesting.com/_topband
