Carol, What kind of transformer are you using? The best transformers are the binocular core transformers that have separate primary and secondary isolated winding's. Did you keep the coax shield disconnected from the ground rod? The secondary should connect the beverage one one wire and ground rod on the other. The primary should have the coax center and shield NOT connected to anything else. Are you sure your shield is intact? Check continuity. GregW7MY
Subject: Topband: Beverage constructionMessage-ID: <f5877a90-58cf-a463-2aef-0cfe7370f...@comcast.net> Content-Type: text/plain; charset=utf-8; format=flowed Hello all, I finally put up a beverage antenna...about 400 feet long. I am feeding it through a 9:1 transformer with some 50 ohm cable ( RG 59). I am finding that it is noisier than my transmit antenna, contrary to what it should be. The wire stays about 6-8feet above ground. ground rods at each end, etc. Any thoughts on the problem and a cure? Thanks, Carol --------------------------------------------------------- Greg Chartrand - W7MY Richland, WA. W7MY Home Page: http://webpages.charter.net/w7my/ _________________ Topband Reflector Archives - http://www.contesting.com/_topband