>"The reason is that the standard DA ground system as far as I know, has always involved strapping radials to a copper strap running along the line of radial intersection, clipping off the radial wire that runs past the strap."
Unless there's modeled or measured data, that's the "conventional wisdom," -- and it makes sense in those commercial installations where it's impractical to use insulated wire that can withstand long-term soil conditions. Or, is there really that much cross coupling that results in radial current cancellation when the wire is insulated? The wire is buried just below the ground surface and only the wire insulation would come in contact between radial wires. However, the conductor-to-conductor distance at the overlap points would be very small. For the answer, I'll likely need to run a NEC 4.2 model, and assign Z axis distances of the radials that can be easily adjusted in NEC that results in anything from a wired cross connection point to any spacing distance in between radials. >Why the teflon insulation? Already acquired from a surplus supplier...a lot of it. In addition to the Teflon insulation, it's solid, silver-tinned copper, 18 AWG. Paul, W9AC _________________ Topband Reflector Archives - http://www.contesting.com/_topband
