## Much higher Z....and much higher RS....and minimal Xs.
Plan B would be to use RG-400... but more than 7 turns.
## N3RR has his 160m CM chokes between 16k and 22k ohms.
If you are going to build a 160M CM choke, you may as well do it right
the 1st time.
Jim VE7RF
-----Original Message-----
From: Peter Voelpel
Sent: Friday, March 30, 2018 9:47 AM
To: 'Jim Thomson' ; [email protected]
Subject: RE: Topband: 160M Balun
Why do you want it resonant?
73
Peter
-----Original Message-----
From: Topband [mailto:[email protected]] On Behalf Of Jim
Thomson
The 160m CM choke needs to resonate lower in freq. It requires more cores
to shift the res freq down.
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
