Can you give so more info on how the PST software works/connects to the board, I use it to turn my rotator but have never seen any option to control anything else in it,
Thanks Trevor EI2GLB ----- Original Message ----- From: VE6WZ_Steve <[email protected]> To: Herbert Schoenbohm <[email protected]> Cc: TopBand List <[email protected]> Sent: Tue, 10 Jul 2018 14:56:36 +0100 (IST) Subject: Re: Topband: Beverage selector switch via IP Like RA0FF I use the Denkovi 8 relay USB board together with the PST rotor control software that provides a standard rotor control interface. Point and shoot at the direction with the mouse to select the direction. The PST rotor software includes software to communicate with the Denkovi boards as well as others. I use two of these at the remote station for selecting both Beverage and the 9 circle directions. I have a video of my set-up here: https://www.youtube.com/watch?v=zFC4Nfa8o_w <https://www.youtube.com/watch?v=zFC4Nfa8o_w> de steve ve6wz. > On Jul 9, 2018, at 5:22 PM, Herbert Schoenbohm <[email protected]> > wrote: > > Looked all over for one of these so my Beverages could be selected remotely > via an IP address. Is there such a device marketed anywhere? > > Herb, KV4FZ > _________________ > Topband Reflector Archives - http://www.contesting.com/_topband _________________ Topband Reflector Archives - http://www.contesting.com/_topband _________________ Topband Reflector Archives - http://www.contesting.com/_topband
