Hover the cursor over the checkmark in the matrix of bands/modes in the log page, and often the operator will be identified
On Tue, 2018-10-23 at 07:26 +0200, Jean-Paul Albert via Topband wrote: > ZL3CW, aka F2CW was, maybe,the operator. > congrat’s for ur QSO. > F6FYA > > Envoyé de mon iPad > > > Le 22 oct. 2018 à 19:55, David Olean <[email protected]> a écrit : > > > > I am not an expert on DX peditions, coming late to HF and 160 meters in my > > life, but I could not get over the operator at VP6D this morning on 1.826. > > Whoever it was, he was flying and getting the call correct the first time > > every time. I was amazed at how well they were doing racking up the Qs. > > There was plenty of QSB here in Maine with the signal going from S 0.2 to > > about S6 on the S meter. At minimum, they were barely copyable. At best, > > they were loud. I used my Europe beverage and found that it was a tad > > better than my SW beverage. I am not sure what was going on there. The > > Europe wires is a pair of 1150 ft bevs, and the SW wire is shorter at about > > 800 ft. After making a contact, I experimented with diversity on the K3 and > > had the SW wire in my right ear and the 45 degree wire in my left ear. > > Copy was better with diversity, but I think I need to check my beverage > > terminations!! Maybe it was an arrival angle situation that favored the > > longer wire's pattern. I learn something every day. > > > > Dave K1WHS > > > > > > _________________ > > Searchable Archives: http://www.contesting.com/_topband - Topband Reflector > > _________________ > Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
