thanks, makes sense.....thats why I asked.... ----- Original Message -----
From: "Chuck Dietz" <[email protected]> To: "Jamie WW3S" <[email protected]> Cc: "Topband" <[email protected]> Sent: Wednesday, December 19, 2018 1:29:40 PM Subject: Re: Topband: choke/bleeder resistor on RXvertical? The choke bleeds off static charges that accumulate on the vertical. While I have witnessed noise from huge static charging to a 32 foot vertical mounted on the roof of the engineering building at Texas Tech in West Texas, the choke does not bleed off “noise”. Noise is radio frequency emissions from noise sources which can be local or distant. Chuck W5PR On Wed, Dec 19, 2018 at 12:19 PM Jamie WW3S < [email protected] > wrote: Since verticals are know to be "noisy" on receive, and a fix is a rf choke or bleeder resistor to ground, anyone try that on short verticals used for receive only to quiet some noise? _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
