Some cable tv splitters will work below 2mhz. You’ll need to test it to be sure.
Mike va3mw Sent from my iPad > On Feb 2, 2019, at 4:42 PM, George Dubovsky <[email protected]> wrote: > > Shameless plug: if anyone needs a new Mini-Circuits ZSC-2-1-75 (different > package, still BNC connectors), I have a bunch of them for $15 each plus > shipping. Change one internal chip resistor, and it's a very good 50 Ohm > splitter/combiner too. > > 73, > > geo - n4ua > >> On Sat, Feb 2, 2019 at 4:35 PM Phil Duff <[email protected]> wrote: >> >> Fred KE7X’s K3 book (pg 162) suggests the Mini-Circuits ZFSC-2-1-75 so I >> picked up a couple used ones on eBay some years ago. These have some >> isolation between output ports. >> >> Have been to be working fine for me. >> >> 73 Phil NA4M >> >> 73 >>> On Feb 2, 2019, at 2:04 PM, Rudy Bakalov via Topband < >> [email protected]> wrote: >>> >>> I use Mini-Circuits Z99SC-62 >>> >>> https://www.minicircuits.com/pdfs/Z99SC-62-S+.pdf >>> >>> Rudy N2WQ >>> >>> Sent using a tiny keyboard. Please excuse brevity, typos, or >> inappropriate autocorrect. >>> _________________ >>> Searchable Archives: http://www.contesting.com/_topband - Topband >> Reflector >> >> -. .- ….- -- >> Phil Duff na4m[at]suddenlink[dot]net >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> _________________ >> Searchable Archives: http://www.contesting.com/_topband - Topband >> Reflector >> > _________________ > Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
