You should probably look for a double pole, I’ve been told you need to open the shield as well....I’ve had similar interference on my hi z array. I’ve opted to go a different route....
Sent from my iPad > On Dec 10, 2019, at 11:30 AM, N4ZR <[email protected]> wrote: > > Now that I've determined that my transmitting antenna must be disconnected, > in order for my K9AY loop to work successfully, can anyone tell me what sort > of ratings are required for the relay required to do this remotely? I'm > assuming a vacuum relay, but in looking at the MGS4U list of available SPST > relays, there is a huge price range. What sort of numbers should I be > looking for, given 1.5 KW and location at the base of a quarter-wave inverted > L. > > I also note that most of the relays listed have 26.5 volt coils. Can anyone > recommend an inexpensive 24-26 volt supply that I can use? > > 73, Pete N4ZR > Check out the Reverse Beacon Network > at <http://reversebeacon.net>, now > spotting RTTY activity worldwide. > For spots, please use your favorite > "retail" DX cluster. > > > _________________ > Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
