Hi All Try
https://uk.farnell.com/multicore-loctite/629443/solder-wire-80-18-2-0-91mm-500g/dp/629443?CMP=KNC-GUK-GEN-KWL-MAN-L5Pages-New-Structure-25May2020-LOCTITE&mckv=_dc|pcrid|437370420948|&gclid=EAIaIQobChMIsZbSq_Hi6QIVCLrtCh3EzwKgEAAYASAAEgIpjvD_BwE# This is from a UK supplier but they are part of the AVNET group of which Newark is/was also one of their companies. Expensive but you may be able to get smaller reels Regards David G4FTC ________________________________ From: Topband <[email protected]> on behalf of Chuck Hutton <[email protected]> Sent: 01 June 2020 03:56 To: [email protected] <[email protected]> Subject: Topband: Soldering aluminum coax shield to copper wire Many many years ago I had partial success soldering aluminum coax shield to copper wire using the motor oil technique. I also believe I had some flux (unknown type) that helped. But I had no luck with motor oil last week and can not find the flux I had, which might be a good thing as it is 20 years old. So what is the easy reliable cheap method to get the job done? Chuck _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
