I am planning a similar installation, using Deeco mast sections (6' x
10"). I have 20 of these, used of course. I don't think they have been
manufactured for decades. Sections interface with pin and socket, with 3
x 1/2" bolts between plates on each end.
Will also be strapping across the joints, as I know what a PITA
intermittent connections are.
It will be a radiating mast with no other antennas on top, apart from a
parallel wire for 80 m operation.
Erection won't commence until at least later in Spring, as the ground is
just so wet now, after one of the wettest years we've had.
73, Luke VK3HJ
On 19/08/2020 4:06 am, Ron WV4P wrote:
Howdy All,
I'm getting ready to put up a Rohn 25 Insulated Base ~1/4 wave vertical.
(115') and I'd like to get some advice if possible.
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
