Hello all, I have a problem when transmitting on 80 and 160: At power levels over about 100 W it causes my heating thermostat to change its setting. Sometimes it goes up and other times it goes down. There isn't enough wire coming out of the wall to put a reasonably sized toroid on and much of the wire running to the heating system is buried in the walls, so shielding would be very difficult.
I would welcome any suggestions. Oh, I do shut the thermostat off while on 80 or 160 and that works okay until the XYL starts asking why the heat won't come on! hi hi TIA and 73, George, KC1V FN31 _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector