Tnx for the quick response. Is a CM choke required at the feedpoint ? If I can't fit the entire required length of wire,(I think I can get aprx 110-120') can I insert a small coil at the feedpoint ? Perhaps relay switched, to obtain 2 x segments. I'm toying with the idea of using the 75m rotary dipole at the top of the mast as a possible RX ant for 160m....might be worth a try at least. The CM choke at the 75m rotary dipole has 10.5 k Z on 160m. I have zero room for dedicated 160m RX ants. My corner lot is only 89' wide x 115' deep. Monster house next door. I have a power line running down the side street, on my side.
Jim VE7RF On Sat, Jul 27, 2024 at 12:50 PM Felipe J. Hernández <[email protected]> wrote: > Yes, is a great performer, don’t waste your time with inv v or sloping > dipoles, is a little trickier to tune but it’s a fantastic radiator. > > Felipe > Np4z > > On Sat, Jul 27, 2024 at 3:48 PM jim.thom [email protected] < > [email protected]> wrote: > >> Has anyone had success with a 160m, 1/4 wave sloper....hanging off a 90' >> tower, with a 40m yagi just above the top of the tower ? >> _________________ >> Searchable Archives: http://www.contesting.com/_topband - Topband >> Reflector >> > _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
