Andy, I just got a NCC-2 from a QRZ seller. It has several optional modules.
My noise is mostly on the higher HF bands. I know the approximate location of the source of the noise. I installed a hi-impedance vertical element about 150ft away from the noise source and it’s connected to my B input on NCC-2. Input A in my main TX antenna which is a yagi at 120ft. The NCC-2 works good at removing most of the noise. It does take some time to get used to adjusting it. I’ve only had it hooked up a couple weeks so still learning how to use. Feel free to contact me privately if you would like. 73, Steve NA5C Sent from my mobile device > On Dec 23, 2024, at 8:12 AM, Andree DL8LAS via Topband > <[email protected]> wrote: > > Hey,do any of you use an NCC-2 or NCC-1 for antenna phasing or noise > reduction? Do you have any experiences and can give me information? > 73 Andy DL8LAS > > _________________ > Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
