HI ALL Our QTH at OM0M islimited in space and there is not room for extended phased beverage systems. I am trying my best to build system with RDF well over 14dBon limited space QTH.
(Kill the side lobs and your RX will love you too.) W1FV-9 circle for 4 directions as well as linear 4el inlinesystem for USA were built in field day styleprior the CQ 160. Well done, but how to connect the hamshack with RX HUB? Single RG6 and CAT5E FTP cable were directly buried undersurrounding road in past. Initial design - RG6 for RF and CAT5E for relay control isnot sufficient nova day. No cable duct = no way to extend anything. The only chance is to use the unoccupied 100 Ohms pairs inCAT5E to carry RF too. CQ WW 160 was the best chance to test RX systems in toughcontest conditions. Technicaldetails on enclosed google disk file: PDF : https://drive.google.com/file/d/1gTtywxB_sgZYRfgy42YB9wCTE9RqV3Cr/view?usp=sharing Eznec for 9CC: https://drive.google.com/file/d/1idf6JsQ32UrEQNs_7yc3hrrMWKT77DQH/view?usp=sharing Eznec for 4el: https://drive.google.com/file/d/19E_VXwYVG1HiDWNU9yybygsKPt0yjeKY/view?usp=sharing VY73 DX BelaOM8AW _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
