Hi relay-tives!
It's my first post here, so please can someone help me with my question
Why do I have to open 9001 UDP at the DSL router firewall and not necessarily
in iptables?
Is it something specific on my side or does someone has an explanation?
The OR service seems to work. Ok - I see nearly no traffic may-be because of my
small
bandwidth. See some information about my system
Setup
PC (P4 2GB noHDD) with USB-LAN adapter (eth2) connected to DSL router (NAT
& firewall)
Tails 0.20.1 on SD card with USB adapter write protected
Server IP x.x.x.33 received from the DHCP DSL router
Goal
Run PC as OR relay non exit
Run OR service
Dont run DIR service
DSL router setting
Open DSL router firewall IP x.x.x.33 TCP 9001 for OR
Open DSL router firewall IP x.x.x.33 UDP 9001 for OR <= IS THE POINT
Done to tails manually each time the PC turns on (amnesia!):
Root terminal (password) and "/sbin/iptables -A INPUT -i eth2 -p tcp
--dport 9001 -j ACCEPT"
The the only change to original tails iptables list is the added rule
Done to Vidalia: relay-non-exit, nickname, email, port=9001, bandwidth limits
typ 20kByte/s and max 25kByte/s
The log messages tell me success and all runs for a week.
Thanks front-up
Zwiebel
_||_
/ \
/ O O \
\ ____ /
\\__//
_______________________________________________
tor-relays mailing list
[email protected]
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
