Robert
-----Original Message-----
From: [email protected]
Sent: Sun, 5 Apr 2015 13:31:49 -0600
To: [email protected]
Subject: [tor-relays] Unreachable ORPort - Potential ISP block?I'm attempting to run a Relay but I haven't been able to get it the ORPort to be confirm as reachable. I've tried lots of things but I'm hoping there is something I haven't thought of yet that can make this work! I've got a 50Mbps symmetrical connection (without data caps) that I would love to have the Tor network utilize.Hardware info:- Asus RT-N66U running DD-WRT- Raspberry Pi 2 running Raspbian- SanDisk MicroSDHC UHS-I 16GBHere are all the steps I've taken:- Formatted the MicroSDHC with Win32DiskImager.- Followed the Instructables Raspberry Pi Tor Relay configuration guide.- Port forwarded via NAT/QoS then Port Forwarding. Protocol is set to TCP, double-checked IP is what is assigned to Raspberry Pi 2 and enable box is checked.- ORPort set to 9001. Also changed ORPort to 443, did "sudo service tor reload" and changed the port in the forwarding section of my router.- Tried router DMZ for Raspberry Pi LAN IP.I would really like to get this to work, if possible. I can't run an Exit node on my connection but since my connection sits unused for most of the day it should be put to good relay use.
_______________________________________________ tor-relays mailing list [email protected] https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
