Good evening, thanks for taking the time to help me. I am fairly new to Pi, Linux/Raspbian, and TOR. But I believe in what TOR stands for so I wanted to do something with the Pi I had sitting around. i have a clean install of Rasbian on my Pi3.I followed an Instructables guide to get most all of my settings for installing TorAll my Apt-gets update and upgrades are current.I am running Tor ver 0.2.9.15 (I need to figure out how to painlessless update that) Apparantely that is the latest version in the sources file. Below is my sources file content: deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi# Uncomment line below then 'apt-get update' to enable 'apt-get source'deb-src http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi#deb http://deb.torproject.org/torproject.org Rasbian main Here is my log file contents:
Oct 25 21:23:04.000 [notice] Tor 0.2.9.15 (git-2dc1a1a2abab5403) opening new log file.Oct 25 21:23:04.579 [notice] Tor 0.2.9.15 (git-2dc1a1a2abab5403) running on Linux with Libevent 2.0.21-stable, OpenSSL 1.1.0f and Zlib 1.2.8.Oct 25 21:23:04.579 [notice] Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warningOct 25 21:23:04.579 [notice] Read configuration file "/usr/share/tor/tor-service-defaults-torrc".Oct 25 21:23:04.579 [notice] Read configuration file "/etc/tor/torrc".Oct 25 21:23:04.593 [notice] Opening Socks listener on 127.0.0.1:9050Oct 25 21:23:04.000 [notice] Parsing GEOIP IPv4 file /usr/share/tor/geoip.Oct 25 21:23:05.000 [notice] Parsing GEOIP IPv6 file /usr/share/tor/geoip6.Oct 25 21:23:06.000 [notice] Bootstrapped 0%: StartingOct 25 21:23:06.000 [notice] Signaled readiness to systemdOct 25 21:23:07.000 [notice] Opening Socks listener on /var/run/tor/socksOct 25 21:23:07.000 [notice] Opening Control listener on /var/run/tor/controlOct 25 21:23:07.000 [notice] Bootstrapped 5%: Connecting to directory serverOct 25 21:23:07.000 [notice] Bootstrapped 10%: Finishing handshake with directory serverOct 25 21:23:09.000 [notice] Bootstrapped 15%: Establishing an encrypted directory connectionOct 25 21:23:09.000 [notice] Bootstrapped 20%: Asking for networkstatus consensusOct 25 21:23:09.000 [notice] Bootstrapped 25%: Loading networkstatus consensusOct 25 21:23:20.000 [notice] I learned some more directory information, but not enough to build a circuit: We have no usable consensus.Oct 25 21:23:20.000 [notice] Bootstrapped 40%: Loading authority key certsOct 25 21:23:21.000 [notice] Bootstrapped 45%: Asking for relay descriptorsOct 25 21:23:21.000 [notice] I learned some more directory information, but not enough to build a circuit: We need more microdescriptors: we have 0/6404, and can only build 0% of likely paths. (We have 0% of guards bw, 0% of midpoint bw, and 0% of exit bw = 0% of path bw.)Oct 25 21:23:23.000 [notice] Bootstrapped 50%: Loading relay descriptorsOct 25 21:23:23.000 [notice] I learned some more directory information, but not enough to build a circuit: We need more microdescriptors: we have 0/6404, and can only build 0% of likely paths. (We have 0% of guards bw, 0% of midpoint bw, and 0% of exit bw = 0% of path bw.)Oct 25 21:23:25.000 [notice] Bootstrapped 56%: Loading relay descriptorsOct 25 21:23:25.000 [notice] Bootstrapped 65%: Loading relay descriptorsOct 25 21:23:25.000 [notice] Bootstrapped 71%: Loading relay descriptorsOct 25 21:23:25.000 [notice] Bootstrapped 78%: Loading relay descriptorsOct 25 21:23:26.000 [notice] Bootstrapped 80%: Connecting to the Tor networkOct 25 21:23:26.000 [notice] Bootstrapped 90%: Establishing a Tor circuitOct 25 21:23:27.000 [notice] Tor has successfully opened a circuit. Looks like client functionality is working.Oct 25 21:23:27.000 [notice] Bootstrapped 100%: DoneOct 25 21:58:10.000 [notice] Interrupt: exiting cleanly.(END) My torrc file is as follows...sorry there are lots of things commented out...I started with a template and just added a few lines as recommended by the Instructables. ## Configuration file for a typical Tor user## Last updated 22 September 2015 for Tor 0.2.7.3-alpha.## (may or may not work for much older or much newer versions of Tor.)#### Lines that begin with "## " try to explain what's going on. Lines## that begin with just "#" are disabled commands: you can enable them## by removing the "#" symbol.#### See 'man tor', or https://www.torproject.org/docs/tor-manual.html,## for more options you can use in this file.#### Tor will look for this file in various places based on your platform:## https://www.torproject.org/docs/faq#torrc SocksPort 0Log notice file /var/log/tor/notices.logRunAsDaemon 1ORPORT 9001DirPort 9030ExitPolicy reject *.*Nickname Lebowski1RelayBandwidthRate 200 KBRelayBandwidthBurst 400KB ## Tor opens a SOCKS proxy on port 9050 by default -- even if you don't## configure one below. Set "SOCKSPort 0" if you plan to run Tor only## as a relay, and not make any local application connections yourself.#SOCKSPort 9050 # Default: Bind to localhost:9050 for local connections.#SOCKSPort 192.168.0.1:9100 # Bind to this address:port too. ## Entry policies to allow/deny SOCKS requests based on IP address.## First entry that matches wins. If no SOCKSPolicy is set, we accept## all (and only) requests that reach a SOCKSPort. Untrusted users who## can access your SOCKSPort may be able to learn about the connections## you make.#SOCKSPolicy accept 192.168.0.0/16#SOCKSPolicy accept6 FC00::/7#SOCKSPolicy reject * ## Logs go to stdout at level "notice" unless redirected by something## else, like one of the below lines. You can have as many Log lines as## you want.#### We advise using "notice" in most cases, since anything more verbose## may provide sensitive information to an attacker who obtains the logs.#### Send all messages of level 'notice' or higher to /var/log/tor/notices.log#Log notice file /var/log/tor/notices.log## Send every possible message to /var/log/tor/debug.log#Log debug file /var/log/tor/debug.log## Use the system log instead of Tor's logfiles#Log notice syslog## To send all messages to stderr:#Log debug stderr ## Uncomment this to start the process in the background... or use## --runasdaemon 1 on the command line. This is ignored on Windows;## see the FAQ entry if you want Tor to run as an NT service.#RunAsDaemon 1 ## The directory for keeping all the keys/etc. By default, we store## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.#DataDirectory /var/lib/tor ## The port on which Tor will listen for local connections from Tor## controller applications, as documented in control-spec.txt.#ControlPort 9051## If you enable the controlport, be sure to enable one of these## authentication methods, to prevent attackers from accessing it.#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C#CookieAuthentication 1 ############### This section is just for location-hidden services ### ## Once you have configured a hidden service, you can look at the## contents of the file ".../hidden_service/hostname" for the address#### HiddenServicePort x y:z says to redirect requests on port x to the## address y:z. #HiddenServiceDir /var/lib/tor/hidden_service/#HiddenServicePort 80 127.0.0.1:80 #HiddenServiceDir /var/lib/tor/other_hidden_service/#HiddenServicePort 80 127.0.0.1:80#HiddenServicePort 22 127.0.0.1:22 ################ This section is just for relays ######################## See https://www.torproject.org/docs/tor-doc-relay for details. ## Required: what port to advertise for incoming Tor connections.#ORPort 9001## If you want to listen on a port other than the one advertised in## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as## follows. You'll need to do ipchains or other port forwarding## yourself to make this work.#ORPort 443 NoListen#ORPort 127.0.0.1:9090 NoAdvertise## The IP address or full DNS name for incoming connections to your## relay. Leave commented out and Tor will guess.#Address noname.example.com ## If you have multiple network interfaces, you can specify one for## outgoing traffic to use.# OutboundBindAddress 10.0.0.5 ## A handle for your relay, so people don't have to refer to it by key.## Nicknames must be between 1 and 19 characters inclusive, and must## contain only the characters [a-zA-Z0-9].#Nickname ididnteditheconfig ## Define these to limit how much relayed traffic you will allow. Your## own traffic is still unthrottled. Note that RelayBandwidthRate must## be at least 75 kilobytes per second.## Note that units for these config options are bytes (per second), not## bits (per second), and that prefixes are binary prefixes, i.e. 2^10,## 2^20, etc.#RelayBandwidthRate 100 KBytes # Throttle traffic to 100KB/s (800Kbps)#RelayBandwidthBurst 200 KBytes # But allow bursts up to 200KB (1600Kb) Plus a bunch of other stuff that is commented out. Appreciate any help. And by the way, i did go back and look through the archives over the last several months and didn't find a solution. Best regards, Judge
_______________________________________________ tor-relays mailing list [email protected] https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
