Hi, For how long have you advertised the v6 address? My relays also received the UnreachableIpv6 flag shortly after I setup IPv6, but after 24 hours that automatically turned into ReachableIPv6. I'm guessing it takes some time for the measurements to take place and propagate.
I can reach your IPv6 address on that port, so the network configuration is fine, at least. Regards, Blicky. On 2019-02-23, Charly Ghislain wrote: > Hi all, > > My tor relay has got the UnreachableIpv6 flag set once i mentionned an > OrPort with my ipv6 address. > > From what i can tell, my server is reachable over ipv6, and can contact the > directory authorities through ipv6 (following the instructions found there: > https://trac.torproject.org/projects/tor/wiki/TorRelayGuide#Makesurerelayportscanbereached > ). > > The node is behind an haproxy that relays ipv6 traffic to natted ipv4 (with > no logging for those concerned). It seems to work fine for web content over > ipv6, and traffic on both ips (v4 and v6) goes through this channel. > > I can successfully telnet my node ORPort using my v6 address. The ports > have been defined this way in torrc: > ORPort 0.0.0.0:9001 NoAdvertise > ORPort 91.121.79.188:9001 NoListen > ORPort [2001:41d0:1:84bc::1]:9001 NoListen > > Is there a way to make a tor client connect to a specific relay to debug > this kind of connectivity issues? Or any other mean? > > In the meantime ive removed the advertized ip6. > > Regards, > > Charly > _______________________________________________ > tor-relays mailing list > [email protected] > https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays _______________________________________________ tor-relays mailing list [email protected] https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
