Yes is true, but this does not work, I think they use DPI devices and if obfs4 / underlying Tor signature is detected, a permanent block for that bridge is added to firewall rules. I tried this many times, only when both side have iat-mode=1 or 2, it is undetected.
If one side has iat-mode=0, internet service provider permanently blocks access to the subnet of the bridge IP (/24), even ICMP / ping don't work anymore for all 255 ip's.. it's sad. Thank you for hosting bridges, really!! Please make 5 with iat-mode 1 and 5 with iat-mode 2, just in case one iat-mode get's blocked. خداحافظ Gesendet: Dienstag, 25. Januar 2022 um 12:36 Uhr Von: "s7r" <s...@sky-ip.org> An: tor-relays@lists.torproject.org Betreff: Re: [tor-relays] We need bridges with iat-mode set to 1 and especially 2 as well! juckiuscae...@web.de wrote: > Hey, > > I live in Iran. Can't disclose my ISP because one person using Tor was sent > to jail recently even though he did nothing wrong. > > For all Bridge Admins: > > You can turn change iat-mode with this config entry in your torrc: > > ServerTransportOptions obfs4 iat-mode=2 > > Good Luck. Hello, Wasn't that iat-mode can be used either at one side either at both sides? E.g. if you use only at your side (client) iat-mode=2 but the bridge runs with iat-mode=0, then only your client will inject traffic but it might still be enough to bypass the filters of the censor. Of course if both sides (client and bridge) use iat-mode=2 both sides contribute and offering a higher degree of obfuscation, but still, worth trying with just client set to iat-mode=2 and bridge set to iat-mode=0 just so we know here. So, could you please get an obfs4 bridge from the usual location (bridges.torproject.org) that has a iat-mode=0 (like tha majority of course) and run it in your client with an overwritten iat-mode=2 setting, then tell us if it connects to Tor? This will let us know how helpful the current iat-mode=0 obfs4 bridges are for Iran. I am spinning 10 new bridges within 24 hours with obfs4, ipv6, low ports and iat-mode=2 natively for Iran anyway, just because you mailed us, but still if you could try what I suggested and let us know it would be great. Thank you, stay safe! _______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays _______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays