Stephan Seitz <[email protected]> wrote Wed, 27 Jan 2016 22:34:57 +0100:
| I changed the torrc and added the following lines (after some | instructions found on the list): For reference, [1] is another hopefully useful resource even if it's a bit outdated by now. [1] https://trac.torproject.org/projects/tor/wiki/doc/IPv6RelayHowto | ORPort [IPv6 IP]:9001 | ExitPolicy reject6 *:* Good. | ClientUseIPv6 1 This configuration is only useful when applied on a client. | „netstat -tanp6 | grep 9001” shows the open port but only one | connection (IPv4 has much more). The program arm is only showing IPv4 | connections. Not many clients connect over IPv6 yet. Relays never do, yet. I don't know if 'arm' knows about IPv6. | The port 9030 is only bound to the IPv4 address but I think that is as | it should be (configuration line is „DirPort 9030”). There's no support for DirPort's on IPv6. | The IPv6 firewall is open for the ports 9001 and 9030. | | Am I doing something wrong? Seems correct. Your IPv6 address should show up in Atlas [2], under "OR Addresses". Does it? [2] https://atlas.torproject.org/ Thanks for running a relay on IPv6! -- tor-talk mailing list - [email protected] To unsubscribe or change other settings go to https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-talk
