Hi Jack, Thanks for testing and giving feedback:-)
Best regards Nio Hi Israel, Do you remember my tweak of the desktop file for 'Root terminal'? Best regards Nio Den 2015-03-28 00:18, Cinque Port Computers skrev: > Nio, Israel, > > That's much better...installed in VB with no PAE...only problem I > noticed was that clicking on Root Terminal is still asking for a root > password. > > Good work Nio. > > JackT. > > > ------------------------------------------------------------------------ > From: jackdtr...@outlook.com > To: nio.wikl...@gmail.com; isr...@torios.org > CC: torios-dev@lists.launchpad.net > Subject: RE: [Torios-dev] [Torios] ToriOS (beta) tarball with 3 kernels > Date: Fri, 27 Mar 2015 22:46:15 +0000 > > Nio, > > I'll give it a try...I'm glad you noticed these problems...I thought it > was just me. > > JackT. > >> Date: Fri, 27 Mar 2015 23:39:08 +0100 >> From: nio.wikl...@gmail.com >> To: jackdtr...@outlook.com; isr...@torios.org >> CC: torios-dev@lists.launchpad.net >> Subject: Re: [Torios-dev] [Torios] ToriOS (beta) tarball with 3 kernels >> >> Den 2015-03-27 15:37, Cinque Port Computers skrev: >> > Nio, Israel, >> > >> > Something is wrong with how I installed in VB as the ToriOS does not >> > remember any settings over a reboot; the nm-applet stays with a red >> > cross on it even though the network connection is fine. >> > >> > I also can't get rid of Nio's liveCD in connected devices which is >> > stopping me inserting the VB Guest Additions iso as a pseudo-CD. >> > >> > It just is not acting the same as when I installed via Israel's isos and >> > updated via the ppas. >> > >> > I'll stop this for a while I think until maybe you guys figure out what >> > I'm doing wrong. >> > >> > JackT. >> > >> >> >> >> Question to Jack: Did you install the tarball with 'my' OBI or with >> >> ToriOS? If you use 'my' OBI, you should instead use the following > tarball, >> >> >> >> >> > > http://phillw.net/isos/one-button-installer/tarballs/ToriOS_3kernels_use-by-OBI-in-trusty.tar.xz >> >> >> >> >> >> Best regards >> >> Nio >> >> Hi again Jack, >> >> The tarball you downloaded '...precise...' was intended to be used by >> ToriOS, which is based on Ubuntu 12.04 'precise', but it needed further >> tweaks (as is described later ...). >> >> If you use 'my OBI' you should use the tarball '...trusty...' and run a >> modern version of the OBI inside Lubuntu Trusty. >> >> dd_blank-obi_7.8GB_27_LubuntuTrusty.img.xz >> >> Is that possible for you (do you have suitable hardware available for >> testing, or is it necessary to test in VirtualBox)? >> >> - a separate computer or at least a separate target USB pendrive with at >> least 8 GB. It is better if it is fast, for example Sandisk Extreme. >> >> - possible to install and configure KVM + virt-manager in a computer >> with enough horsepower, could be the same computer, where you run >> VirtualBox). >> >> -o- >> >> Hi Israel and Jack, >> >> After some more tests, I found that nm-applet and some other things work >> when installed by 'my OBI' in precise, but not when installed by ToriOS >> live. I know that it is like this, but I don't know why. Anyway, I made >> a new tarball, where I added the kernels and made it boot to the grub >> menu. This new system works well, when installed by ToriOS live (but not >> by 'my OBI'). It is uploaded to phillw.net, and can be downloaded and >> selected in ToriOS live. The link should be one line, >> >> > http://phillw.net/isos/linux-tools/OBI/precise/tarballs/ToriOS_3-kernels_01_use-by-ToriOS-live.tar.xz >> >> $ ls -l ToriOS_3-kernels_01_use-by-ToriOS-live.tar.xz >> -rw-r--r-- 1 nio nio 430014032 mar 27 19:37 >> ToriOS_3-kernels_01_use-by-ToriOS-live.tar.xz >> >> $ md5sum ToriOS_3-kernels_01_use-by-ToriOS-live.tar.xz >> 81b841b0612f4298b3652437bfa85757 >> ToriOS_3-kernels_01_use-by-ToriOS-live.tar.xz >> >> >> I have also changed 'dltbl', so that it will not confuse end users. Use >> the attached file in the next version of the ToriOS live system >> >> $ md5sum dltbl >> 64fce314d2105cc832cc8d8c1786d832 dltbl >> ----- >> $ diff ~/dltbl dltbl0 >> 160,161c160 >> < # rm "${tarpath}"/"$target" >> < rm "$target" >> --- >> > rm "${tarpath}"/"$target" >> 163,168c162 >> < mv "$target" "${tarpath}" 2> /dev/null >> < if [ $? -ne 0 ] >> < then >> < echo "Could not write to /tarballs, which is normal in a live session." >> < echo "'Select tarball' can still find the tarball automatically." >> < fi >> --- >> > mv "$target" "${tarpath}" >> 172a167 >> > >> ----- >> >> Best regards >> Nio -- Mailing list: https://launchpad.net/~torios-dev Post to : torios-dev@lists.launchpad.net Unsubscribe : https://launchpad.net/~torios-dev More help : https://help.launchpad.net/ListHelp
