hans@Hacker:~$ ping 10.0.0.5 PING 10.0.0.5 (10.0.0.5) 56(84) bytes of data. 64 bytes from 10.0.0.5: icmp_seq=1 ttl=64 time=3.45 ms 64 bytes from 10.0.0.5: icmp_seq=2 ttl=64 time=1.76 ms 64 bytes from 10.0.0.5: icmp_seq=3 ttl=64 time=3.47 ms 64 bytes from 10.0.0.5: icmp_seq=4 ttl=64 time=2.40 ms ^C --- 10.0.0.5 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3004ms rtt min/avg/max/mdev = 1.761/2.772/3.473/0.729 ms hans@Hacker:~$ nmap 10.0.0.5
Starting Nmap 6.40 ( http://nmap.org ) at 2014-09-14 18:43 CEST Nmap scan report for 10.0.0.5 Host is up (0.014s latency). Not shown: 993 filtered ports PORT STATE SERVICE 80/tcp open http 139/tcp open netbios-ssn 631/tcp open ipp 9100/tcp open jetdirect 9101/tcp open jetdirect 9103/tcp open jetdirect 9111/tcp open DragonIDSConsole Nmap done: 1 IP address (1 host up) scanned in 26.22 seconds hans@Hacker:~$ /usr/lib/cups/backend/snmp hans@Hacker:~$ sudo /usr/lib/cups/backend/dnssd [sudo] password for hans: DEBUG: sent=0, count=0 DEBUG: sent=0, count=0 hans@Hacker:~$ /usr/lib/cups/backend/snmp 10.0.0.5 hans@Hacker:~$ lpinfo -v network ipp network https network ipp14 network socket network ipps network lpd network smb serial serial:/dev/ttyUSB0?baud=230400 network http direct hp direct hpfax hans@Hacker:~$ avahi-browse -a -v -t -r Server-Version: avahi 0.6.31; Rechnername: Hacker.local E Ifce Prot Name Typ -Domain + eth0 IPv6 Hacker [1c:6f:65:3f:74:ce] Arbeitsplatzrechner local + eth0 IPv4 Hacker [1c:6f:65:3f:74:ce] Arbeitsplatzrechner local = eth0 IPv6 Hacker [1c:6f:65:3f:74:ce] Arbeitsplatzrechner local hostname = [Hacker.local] address = [fe80::1e6f:65ff:fe3f:74ce] port = [9] txt = [] = eth0 IPv4 Hacker [1c:6f:65:3f:74:ce] Arbeitsplatzrechner local hostname = [Hacker.local] address = [10.0.0.1] port = [9] txt = [] : Datencache erschöpft : Alle Einträge bisher hans@Hacker:~$ avahi-browse -a -v -c -r Server-Version: avahi 0.6.31; Rechnername: Hacker.local E Ifce Prot Name Typ -Domain + eth0 IPv6 Hacker [1c:6f:65:3f:74:ce] Arbeitsplatzrechner local + eth0 IPv4 Hacker [1c:6f:65:3f:74:ce] Arbeitsplatzrechner local = eth0 IPv6 Hacker [1c:6f:65:3f:74:ce] Arbeitsplatzrechner local hostname = [Hacker.local] address = [fe80::1e6f:65ff:fe3f:74ce] port = [9] txt = [] = eth0 IPv4 Hacker [1c:6f:65:3f:74:ce] Arbeitsplatzrechner local hostname = [Hacker.local] address = [10.0.0.1] port = [9] txt = [] : Datencache erschöpft hans@Hacker:~$ ifconfig eth0 Link encap:Ethernet Hardware Adresse 1c:6f:65:3f:74:ce inet Adresse:10.0.0.1 Bcast:10.0.0.255 Maske:255.255.255.0 inet6-Adresse: fe80::1e6f:65ff:fe3f:74ce/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX-Pakete:21836 Fehler:0 Verloren:0 Überläufe:0 Fenster:0 TX-Pakete:20926 Fehler:0 Verloren:0 Überläufe:0 Träger:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX-Bytes:23302812 (23.3 MB) TX-Bytes:2313162 (2.3 MB) lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:65536 Metrik:1 RX-Pakete:1278 Fehler:0 Verloren:0 Überläufe:0 Fenster:0 TX-Pakete:1278 Fehler:0 Verloren:0 Überläufe:0 Träger:0 Kollisionen:0 Sendewarteschlangenlänge:0 RX-Bytes:135543 (135.5 KB) TX-Bytes:135543 (135.5 KB) hans@Hacker:~$ route Kernel-IP-Routentabelle Ziel Router Genmask Flags Metric Ref Use Iface default dsldevice.home 0.0.0.0 UG 0 0 0 eth0 10.0.0.0 * 255.255.255.0 U 1 0 0 eth0 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1366743 Title: Ubuntu 14.04 only prints LibreOffice Docs Status in “cups” package in Ubuntu: Incomplete Bug description: I use Ubuntu 14.04, a Logilink Fast Ethernet Printserver and a HP Color Laserjet 2550L. Under Ubuntu 12.10 everything worked fine and I could print any file. The printer is connected via a USB to the Printserver and adressed via HP Jet Direct. As already said, everything worked fine under 12.10 and I didn't change any settings on the printserver. I use the ubuntu tool for installing the printer, as a normal user not su. Searching the network, for network printers offers me three possibilities for adressing the printer. HP Jet Direct, IPP and LPD/LPR. I tried all of them with the same result. I use the drivers from the Database, not surprisingly HP/Color Laserjet 2550/HP Color Laserjet 2550 Series Postscript [en] (recommended). After installing the printer the first thing that fails is the Testpage. The ubunut printer spooler tells me that the job is in progress and the printer starts to blink to tell me that he is receiving input. Unfortunatly the job never starts or gets finished. After blinking quite a while the printer stops an nothing happes. Interestingly, after canceling the job on my computer and a restart of the printer, the printserver and my computer, I can open libre office writing "Hello World" go to print and the printer starts immediately and prints the correct result. But this only works for libreoffice and only with text, as soon as there is an image in the document it doesn't work. I can't print any pdf or even from gedit. Nothing works. Always the same as with the Testpage. Printer starts to blink but nothing happens. lsb_release -rd Description: Ubuntu 14.04.1 LTS Release: 14.04 Thanks for Help. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1366743/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
