I don't actually know what BOOT_DEBUG does -- I've never seen it before, it does not appear anywhere in my yakkety system, and it's for sure not something the kernel, initramfs-tools, or systemd look at. My best guess is that this is a debian-installer specific debug flag.
So from what I can tell, the readlink path issue is merely a red herring -- it's good to fix it of course, but it's unrelated to the boot failure. Since this is a heisenbug, it rather seems to me that this is some timing issue -- any extra debugging, or time spent with changing boot parameters in the boot loader will change the behaviour (e. g. make the detection of network devices by the hardware finish earlier). ATM I'm afraid there isn't enough useful information here yet to understand what's going on -- indeed having a screen output where the problem does happen would be helpful. dmesg logs and "udevadm info -e" as well, as Steve says. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1615021 Title: Unable to network boot Ubuntu 16.04 installer normally on Briggs Status in busybox package in Ubuntu: Fix Committed Status in debian-installer package in Ubuntu: Triaged Status in systemd package in Ubuntu: Fix Committed Status in busybox source package in Xenial: Won't Fix Status in debian-installer source package in Xenial: Triaged Status in systemd source package in Xenial: In Progress Status in busybox source package in Yakkety: Fix Committed Status in debian-installer source package in Yakkety: Triaged Status in systemd source package in Yakkety: Fix Committed Bug description: == Comment: #7 - Guilherme Guaglianoni Piccoli <gpicc...@br.ibm.com> - 2016-08-19 10:08:07 == The normal procedure to perform a Netboot installation of Ubuntu 16.04 is to download the latest vmlinux and initrd.gz files available, and kexec them with no parameters (at least in ppc64el). We're experiencing a strange issue in which the installer freezes before menus are showed. The system hangs in the point specified below, right after the i40e driver initialization: [ 11.052832] i40e 0002:01:00.0 enP2p1s0f0: renamed from eth0 [ 11.073976] i40e 0002:01:00.1 enP2p1s0f1: renamed from eth1 [ 11.117799] i40e 0002:01:00.2 enP2p1s0f2: renamed from eth2 [ 11.225745] i40e 0002:01:00.3 enP2p1s0f3: renamed from eth3 ***HANG*** The most difficult part in this issue is that it seems to be a timing issue/race condition, and many debug trials end up by avoiding the issue reproduction (heisenbug). We were successful though in getting logs by booting the kernel with the command-line "BOOT_DEBUG=2" and by changing the initrd in order to enable systemd debug; only the files "init" and "start-udev" were changed in initrd, both attached here. We've attached here a saved screen session that shows the entire boot process until it gets flooded with lots of messages like: "starting '/bin/readlink /etc/udev/rules.d/80-net-setup-link.rules' '/bin/readlink /etc/udev/rules.d/80-net-setup-link.rules'(err) 'failed to execute '/bin/readlink' '/bin/readlink /etc/ udev/rules.d/80-net-setup-link.rules': No such file or directory' seq 3244 queued, 'add' 'pci_bus' starting '/bin/readlink /etc/udev/rules.d/80-net-setup-link.rules' passed 408 byte device to netlink monitor 0x1003cfe8020seq 3236 running'/bin/readlink /etc/udev/rules.d/80-net-setup-l ink.rules'(err) 'failed to execute '/bin/readlink' '/bin/readlink /etc/udev/rules.d/80-net-setup-link.rules': No such file or directory' '/bin/readlink /etc/udev/rules.d/80-net-setup-link.rules'(err) 'failed to execute '/bin/readlink' '/bin/readlink /etc/ udev/rules.d/80-net-setup-link.rules': No such file or directory' Process '/bin/readlink /etc/udev/rules.d/80-net-setup-link.rules' failed with exit code 2. PROGRAM '/bin/readlink /etc/udev/rules.d/80-net-setup-link.rules' /lib/udev/rules.d/73-usb-net-by-mac.rules:6 passed device to netlink monitor 0x1003d01f730 " Then it keeps hanged in this stage. We re-tested it by changing the file 73-usb-net-by-mac.rules in initrd, replacing " /etc/udev/rules.d/80-net-setup-link.rules" to "/lib/udev/rules.d/80 -net-setup-link.rules", since the former does not exist whereas the latter does. Same issue were observed! Notice that if we boot the installer with command-line "net.ifnames=0" or "net.ifnames=1", the problem does not reproduces anymore. We want to ask Canonical's help in investigating this issue. Thanks, Guilherme SRU INFORMATION for systemd =========================== Test case: * Check what happens for uevents on devices which are not USB network interfaces: udevadm test /sys/devices/virtual/mem/null udevadm test /sys/class/net/lo With the current version these will run PROGRAM '/bin/readlink /etc/udev/rules.d/80-net-setup-link.rules' /lib/udev/rules.d/73-usb-net-by-mac.rules:6 which is pointless. With the proposed version these should be gone. * Ensure that the rule still works as intended by connecting an USB network device that has a permanent MAC address (e. g. Android tethering uses a temporary MAC): You should get a MAC-based name like "enx12345678" for it. Now disconnect it again, disable ifnames with sudo ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules and reconnect the device. You should now get a kernel name like "usb0" for it. * Regression potential: Errors in the rule could break persistent naming - or its disabling - of USB network interfaces. Running the above test carefully is important to ensure this keeps working. This has little to no actual effect on anything else on the system (aside from a performance impact and spamming logs), so overall the regression potential is low. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/busybox/+bug/1615021/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
